{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"082-6093-RFX","brand":"Amphenol","brandSlug":"amphenol","productSlug":"082-6093-RFX","canonicalUrl":"https://icsourcedirect.com/amphenol/082-6093-RFX","factsUrl":"https://icsourcedirect.com/api/mcp/products/082-6093-RFX","rawCanonicalId":null},"summary":{"shortDescription":"Amphenol RF 082-6093-RFX, N Type jack (female socket), 50 Ohm, DC-6 GHz, crimp termination, bulkhead front-side nut mounting, weatherproof, includes mounting hardware.","salesMarkdown":"## N Type Jack, 50 Ohm, DC–6 GHz — Bulkhead Kit for RG174-Class Cables The 082-6093-RFX: The connector ships as a complete mounting kit — six pieces in the bag: the jack body, one crimp contact, a ferrule, a panel gasket, a lockwasher, and a hex nut. That means no separate hardware sourcing for the bulkhead install; the gasket and lockwasher are already in the pack. The 50 Ohm impedance is maintained through a PTFE dielectric and a gold-plated brass/phosphor bronze center contact. Insertion loss is spec'd at 0.15 dB — a tight number that tells you the interface and dielectric are well-matched through the rated band. The 1500 V voltage rating is a dielectric-withstand figure for the air gap and PTFE, not a continuous operating line; in practice the system voltage is limited by the cable and the 6 GHz frequency ceiling. ## Cable Fit and Termination — RG174 and Its Siblings The cable group list — RG-174, 188, 188A, 316, LMR-100, M17/119-RG174 — all share a similar dielectric diameter and braid coverage, so the same crimp ferrule and center contact work across them. If you are building an RG174 patch lead, this is the correct N Type jack for the job. The crimp termination (center contact and shield) is standard for field-terminated coax: strip to the right dimensions, slide the ferrule, crimp the center pin, then crimp the ferrule over the braid. No solder, no tape. The threaded fastening (N Type interface) and the bulkhead front-side nut mounting mean the jack is torqued against the panel from the outside. The included gasket seals the panel interface, and the lockwasher prevents the nut from backing off under vibration. The weatherproof ingress protection rating confirms it is suited for outdoor or tower-top enclosures where moisture ingress is a concern. ## 500 Mating Cycles — Field-Service Grade The 500-cycle mating life is typical for a gold-plated N Type interface. The gold on the center contact (24) handles repeated connect-disconnect without the galling or oxidation you would see on tin-plated RF connectors. For a bulkhead-mounted jack that gets mated and unmated during installation, test, and occasional service, 500 cycles is ample — the connector will outlast the cable assembly in most field deployments.","metaTitle":"082-6093-RFX N Type Jack, 50 Ohm, 6 GHz, Bulkhead Kit","metaDescription":"082-6093-RFX N Type jack, 50 Ohm, DC to 6 GHz, 0.15 dB insertion loss. Crimp termination for RG174/316/LMR-100. Weatherproof bulkhead kit with hardware.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors"],"specifications":{"Mfr":"Amphenol RF","Series":"-","Package":"Bulk","Features":"-","Includes":"6 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Lockwasher, 1 Nut","Impedance":"50Ohm","Body Finish":"Nickel","Cable Group":"RG-174, 188, 188A, 316, LMR-100, M17/119-RG174","Body Material":"Brass","Housing Color":"Silver","Mating Cycles":"500","Mounting Type":"Panel Mount","Connector Type":"Jack, Female Socket","Fastening Type":"Threaded","Insertion Loss":"0.15dB","Product Status":"Active","Voltage Rating":"1500 V","Connector Style":"N Type","Frequency - Max":"6 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"Bulkhead - Front Side Nut","Ingress Protection":"Weatherproof","Shield Termination":"Crimp","Base Product Number":"082-609","Contact Termination":"Crimp","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-65°C~165°C","Center Contact Plating":"Gold","Center Contact Material":"Brass; Phosphor Bronze"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$13.8200","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/082-6093-RFX/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy the 082-6093-RFX and what is the lead time?","answer":"Submit an RFQ for your quantity and target delivery window."},{"question":"Is 082-6093-RFX compatible with RG174 cable?","answer":"Yes. RG-174 is explicitly listed in the compatible cable group, along with RG-188, 188A, 316, LMR-100, and M17/119-RG174. The same crimp ferrule and center contact work across all of them."},{"question":"Does 082-6093-RFX come with all necessary mounting hardware?","answer":"Yes. You do not need to source hardware separately for a standard bulkhead install."},{"question":"What is the insertion loss rating of 082-6093-RFX?","answer":"Insertion loss is spec'd at 0.15 dB across the rated band. That figure reflects the matched impedance through the PTFE dielectric and gold-plated center contact."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/amphenol/082-6093-RFX","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/amphenol/082-6093-RFX when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-23T20:41:44.623Z","lastPublished":"2026-07-23T20:41:44.623Z","indexable":true}}