{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"100147-1","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"100147-1","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/100147-1","factsUrl":"https://icsourcedirect.com/api/mcp/products/100147-1","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity Z-PACK receptacle, 110 positions, 5 rows, 0.079\" (2.00mm) pitch, press-fit, right-angle, gold 30.0µin, 1.5A, 500Vrms.","salesMarkdown":"## What This 110-Position Backplane Receptacle Does The TE Connectivity 100147-1 is a 110-position receptacle from the Z-PACK series, built for dense backplane interconnects where you need to pack a lot of signal lines into a board-edge footprint. The 0.079\" (2.00mm) pitch keeps routing manageable — tight enough for 110 circuits across 5 rows, but not so fine that you need micro-via layers to escape the footprint. Each contact is rated 1.5 A, which is typical for a high-density signal connector at this pitch; the 500Vrms voltage rating is higher than you'd expect for 2.00mm pitch, so the housing creepage distances are generous for the class. The press-fit termination is the key differentiator here — no solder means no wave solder defects, no flux residues, and the connector can be pressed into plated through-holes on a backplane in one operation. The connector style is listed as A 22, which is a Z-PACK keying variant — the mating pin header must match this keying code to avoid cross-mating with other Z-PACK connectors on the same backplane. ## Mating Half and Board Fit This is a receptacle (female sockets), so it mates with a Z-PACK pin header (male pins) of the same 110-position count, 5-row layout, and A 22 keying. The press-fit tails go into 0.040\" (1.02mm) plated through-holes on the backplane — the hole size and finished plating thickness matter for the press-in force, so use TE's recommended PCB layout from the product drawing.","metaTitle":"TE Connectivity 100147-1 Z-PACK Receptacle, 110 Pos","metaDescription":"TE Connectivity 100147-1 Z-PACK receptacle, 110 positions, 0.079\" (2.00mm) pitch, press-fit termination, 1.5A per contact, 500Vrms.","metaKeywords":null},"attributes":{"series":"Z-PACK","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Backplane Connectors"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Pitch":"0.079\\\" (2.00mm)","Series":"Z-PACK","Package":"Tube","Features":"-","Termination":"Press-Fit","Mounting Type":"Board Edge, Through Hole, Right Angle","Connector Type":"Receptacle, Female Sockets","Contact Finish":"Gold","Number of Rows":"5","Product Status":"Active","Voltage Rating":"500Vrms","Connector Style":"A 22","Connector Usage":"-","lifecycle_stage":"unknown","Base Product Number":"100147","Number of Positions":"110","Current Rating (Amps)":"1.5 A","Operating Temperature":"-55°C ~ 125°C","Contact Finish Thickness":"30.0µin (0.76µm)","Number of Positions Loaded":"All"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$13.8500","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$13.85000","currency":"USD"},{"qty":10,"price":"$13.56600","currency":"USD"},{"qty":25,"price":"$13.20560","currency":"USD"},{"qty":50,"price":"$12.55600","currency":"USD"},{"qty":100,"price":"$11.32930","currency":"USD"},{"qty":250,"price":"$11.25716","currency":"USD"},{"qty":500,"price":"$9.81394","currency":"USD"},{"qty":1000,"price":"$9.74177","currency":"USD"}]},"links":{"datasheetUrl":"https://www.te.com/usa-en/product-100147-1.datasheet.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is 100147-1 RoHS compliant?","answer":"No, the 100147-1 is RoHS non-compliant. If your project requires RoHS compliance, you will need to select a different suffix variant from the Z-PACK series that carries the RoHS-compliant plating option."},{"question":"What is the mating connector for 100147-1?","answer":"The 100147-1 is a receptacle that mates with a Z-PACK pin header of the same 110-position count, 5 rows, and A 22 keying code. The mating half must have the same keying to prevent cross-mating with other Z-PACK connectors on the backplane."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"isd-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/100147-1","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/100147-1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:45.458Z","lastPublished":"2026-07-17T19:50:45.458Z","indexable":true}}