{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"122332RP","brand":"Amphenol","brandSlug":"amphenol","productSlug":"122332RP","canonicalUrl":"https://icsourcedirect.com/amphenol/122332RP","factsUrl":"https://icsourcedirect.com/api/mcp/products/122332RP","rawCanonicalId":null},"summary":{"shortDescription":"Amphenol RF 122332RP RP-TNC jack, male pin, 50 Ohm, 11 GHz, 500 V, bulkhead rear-side nut mount, solder cup termination, nickel-plated brass body, gold-plated phosphor bronze center contact.","salesMarkdown":"## RP-TNC Jack for RF Signal Paths The 122332RP: The threaded coupling and bulkhead mounting with a rear-side nut make it a panel-mount interconnect for enclosures where a vibration-resistant, weatherproof mate is needed. The 11 GHz frequency ceiling covers L-band through X-band applications, including Wi-Fi 6E, 5G small-cell backhaul, and satellite downlinks. Insertion loss is held to 0.18 dB across the band, which keeps the signal clean enough that you do not need to budget extra gain for the interconnect. ## Threaded Coupling and Bulkhead Mount for Vibration Resistance The threaded fastening type locks the mated pair against vibration — a standard requirement for outdoor antenna feeds, tower-mounted radios, and industrial machinery where a bayonet or snap-on connector would work loose. The bulkhead mount with a rear-side nut secures the jack to the panel face, and the shield termination is solder, so the ground path through the shell is continuous. The extended insulation feature adds creepage distance between the center conductor and the body, supporting the 500 V rating for applications where the RF line carries a DC bias or where high-voltage isolation is needed. ## Solder Cup Termination — Field Termination Without a Crimp Tool The contact termination is a solder cup, not a crimp barrel. That means you terminate the center conductor and shield by soldering directly to the cup and the body — no special crimp tool or die set required. The trade-off is that termination quality depends on soldering skill and the right flux for the coaxial cable dielectric. The dielectric material is polyoxymethylene (POM) acetal, which holds its RF properties through the soldering heat cycle and does not cold-flow under the compression of a cable clamp. ## Operating Range and Material Choices The nickel-plated brass body provides RF shielding effectiveness and corrosion resistance in humid or salt-spray environments.","metaTitle":"122332RP RP-TNC Jack, 50 Ohm, 11 GHz, Bulkhead Mount","metaDescription":"122332RP RP-TNC jack, male pin, 50 Ohm impedance, 11 GHz max frequency, 500 mating cycles, solder cup termination, nickel-plated brass body, active production","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors"],"specifications":{"Mfr":"Amphenol RF","Series":"-","Package":"Bag","Features":"Extended Insulation","Includes":"-","Impedance":"50Ohm","Body Finish":"Nickel","Cable Group":"-","Body Material":"Brass","Housing Color":"Silver","Mating Cycles":"500","Mounting Type":"Panel Mount","Connector Type":"Jack, Male Pin","Fastening Type":"Threaded","Insertion Loss":"0.18dB","Product Status":"Active","Voltage Rating":"500 V","Connector Style":"RP-TNC","Frequency - Max":"11 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"Bulkhead - Rear Side Nut","Ingress Protection":"-","Shield Termination":"Solder","Base Product Number":"122332","Contact Termination":"Solder Cup","Dielectric Material":"Polyoxymethylene (POM) Acetal","Operating Temperature":"-40°C~85°C","Center Contact Plating":"Gold","Center Contact Material":"Phosphor Bronze"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.2000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/bea088808c663df25e1124022a0101c8.pdf","sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/122332RP/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy the 122332RP RP-TNC jack?","answer":"Submit a request for current pricing and availability — the supply posture is confirmed at quote time."},{"question":"What is the impedance of 122332RP?","answer":"The 122332RP has a 50 Ohm impedance, the standard for RF signal paths in telecom and test equipment."},{"question":"Does 122332RP have a threaded coupling?","answer":"Yes, the 122332RP uses a threaded fastening type for vibration-resistant mating, typical for outdoor RF installations."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/amphenol/122332RP","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/amphenol/122332RP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-23T20:41:44.623Z","lastPublished":"2026-07-23T20:41:44.623Z","indexable":true}}