{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"132286RP","brand":"Amphenol","brandSlug":"amphenol","productSlug":"132286RP","canonicalUrl":"https://icsourcedirect.com/amphenol/132286RP","factsUrl":"https://icsourcedirect.com/api/mcp/products/132286RP","rawCanonicalId":null},"summary":{"shortDescription":"Amphenol RF RP-SMA jack, male pin, 50 Ohm, DC-12.4 GHz, 375 V, panel mount bulkhead, crimp/solder termination, gold body, 8-piece kit.","salesMarkdown":"## Reverse-Polarity SMA Jack for Thin-Coax Bulkhead Runs The 132286RP: It mates with an RP-SMA female socket (which has the internal barrel), not with a standard SMA female. The connector is rated for DC through 12.4 GHz at 50 Ohm nominal impedance, covering ISM bands, L-band, S-band, and most wireless infrastructure frequencies below Ku-band. The gold-plated brass body and PTFE dielectric keep insertion loss consistent across the band. The kit includes all eight pieces needed for a complete install: the connector body, a crimp ferrule for shield termination, a solder centre contact, a PTFE insulator, a silicone gasket, a lockwasher, a hex nut, and a sleeving tube. No separate hardware order required. The crimp ferrule and centre contact are sized for RG-178, RG-178B, RG-196, RG-196A, and M17/93-RG178 — all thin-diameter 50 Ohm coax. The gold-over-brass centre contact and gold body finish resist corrosion and maintain low contact resistance through repeated mate-unmate cycles in field-service or test-bench use. For applications requiring daily reconnection over several years, consider a higher-cycle-rated connector; for occasional access, this is adequate. ## How It Sits Against the Standard SMA Sibling The 132134-11 is another standard SMA jack (female socket) with an 18 GHz frequency ceiling, useful if the application needs Ku-band coverage. But it also uses solder shield termination and beryllium copper contacts — a different termination workflow and contact material set.","metaTitle":"Amphenol RF 132286RP RP-SMA Jack, 50 Ohm, 12.4 GHz, Bulkhead","metaDescription":"Amphenol RF 132286RP RP-SMA jack, male pin, 50 Ohm, DC-12.4 GHz, 375 V. Gold-plated brass body, crimp shield, solder center. Kit includes all 8 hardware pieces.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors","RF Cable Assemblies"],"specifications":{"Mfr":"Amphenol RF","Series":"-","Package":"Bulk","Features":"-","Includes":"8 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Insulator, 1 Lockwasher, 1 Nut, 1 Sleeve","Impedance":"50Ohm","Body Finish":"Gold","Cable Group":"RG-178, 178A, 178B, 196, 196A, M17/93-RG178","Body Material":"Brass","Housing Color":"Gold","Mating Cycles":"500","Mounting Type":"Panel Mount","Connector Type":"Jack, Male Pin","Fastening Type":"Threaded","Insertion Loss":"-","Product Status":"Active","Voltage Rating":"375 V","Connector Style":"RP-SMA","Frequency - Max":"12.4 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"Bulkhead - Front Side Nut","Ingress Protection":"-","Shield Termination":"Crimp","Base Product Number":"132286","Contact Termination":"Solder","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-65°C~165°C","Center Contact Plating":"Gold","Center Contact Material":"Brass"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.6900","stockQuantity":26,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/d5cd1a5f6c96265df9dc9be8e356639f.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the impedance of 132286RP?","answer":"The 132286RP is a 50 Ohm nominal impedance connector, standard for RF applications."},{"question":"Is 132286RP compatible with RG-178 and RG-196 cables?","answer":"Yes, the connector is designed for RG-178, RG-178A, RG-178B, RG-196, RG-196A, and M17/93-RG178 cables. The crimp ferrule and centre contact are sized for these thin-diameter coax types."},{"question":"What does the 132286RP kit include?","answer":"The kit includes 8 pieces: 1 connector body, 1 centre contact, 1 crimp ferrule, 1 gasket, 1 PTFE insulator, 1 lockwasher, 1 hex nut, and 1 sleeving tube. All hardware for a complete bulkhead install is in the bag."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"isd-matrix-langgraph","citationUrl":"https://icsourcedirect.com/amphenol/132286RP","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/amphenol/132286RP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-23T20:41:44.623Z","lastPublished":"2026-07-23T20:41:44.623Z","indexable":true}}