{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"132410-10","brand":"Amphenol","brandSlug":"amphenol","productSlug":"132410-10","canonicalUrl":"https://icsourcedirect.com/amphenol/132410-10","factsUrl":"https://icsourcedirect.com/api/mcp/products/132410-10","rawCanonicalId":null},"summary":{"shortDescription":"Amphenol RF SMA receptacle, female socket, 50 Ohm, 18 GHz max, gold-plated brass body, board edge/end launch mount, solder termination, bulk package.","salesMarkdown":"## SMA End-Launch Receptacle for 18 GHz Signal Paths It is a single-port, 50 Ohm design rated to 18 GHz, placing it at the top end of standard SMA performance — most SMA connectors top out around 12.4 or 18 GHz, and this one holds the full 18 GHz bandwidth. The 18 GHz frequency maximum means this connector passes signals up to Ka-band without a significant impedance bump — useful for microwave links, radar IF stages, and high-speed digital clocks where the edge rate pushes into the GHz range. The 500-cycle rating comes from the gold-on-gold contact interface (gold-plated centre contact in a gold-plated body); that is enough for a production test point or a field-replaceable module that sees regular connect/disconnect, but not for a daily-use lab cable that gets cycled hundreds of times a week. For that duty, look at an SMA with a higher cycle spec or a threaded coupling that distributes wear differently. ## Board Layout: End-Launch Footprint and Solder Termination End-launch mounting places the connector body flush with the board edge, so the centre pin and ground legs solder directly to traces on the top layer. The shield termination is solder — no press-fit or snap-in retention — so the board footprint must include solder pads for the four ground legs and the centre pin. The body is threaded (fastening type: threaded), so the mating SMA plug screws on; the panel or bracket needs clearance for a wrench or torque tool. The PTFE dielectric inside the connector body sets the impedance, so the PCB launch geometry (trace width, ground clearance, dielectric height) must match 50 Ohm to avoid a reflection at the interface.","metaTitle":"Amphenol RF 132410-10 SMA Receptacle, 50 Ohm, 18 GHz","metaDescription":"Amphenol RF 132410-10 SMA receptacle, 50 Ohm, 18 GHz max, gold-plated brass body, end launch, 500 mating cycles. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors"],"specifications":{"Mfr":"Amphenol RF","Series":"-","Package":"Bulk","Features":"-","Includes":"-","Impedance":"50Ohm","Body Finish":"Gold","Cable Group":"-","Body Material":"Brass","Housing Color":"Gold","Mating Cycles":"500","Mounting Type":"Board Edge, End Launch","Connector Type":"Receptacle, Female Socket","Fastening Type":"Threaded","Insertion Loss":"-","Product Status":"Active","Connector Style":"SMA","Frequency - Max":"18 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"-","Ingress Protection":"-","Shield Termination":"Solder","Base Product Number":"132410","Contact Termination":"Solder","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-65°C~165°C","Center Contact Plating":"Gold","Center Contact Material":"Beryllium Copper"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10.6900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/8ebef6d60bc49128b59877f97491ecf8.pdf","sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/132410-10/alternatives.json"},"ai":{"faq":[{"question":"What is the impedance of the 132410-10?","answer":"The 132410-10 is a 50 Ohm connector, the standard impedance for RF and microwave signal paths."},{"question":"Is the 132410-10 a threaded connector?","answer":"Yes, the fastening type is threaded — the mating SMA plug screws onto the receptacle for a secure, vibration-resistant connection."},{"question":"What is the connector type of the 132410-10?","answer":"The 132410-10 is an SMA receptacle with a female socket contact, designed for board edge or end launch mounting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/amphenol/132410-10","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/amphenol/132410-10 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-23T20:41:44.623Z","lastPublished":"2026-07-23T20:41:44.623Z","indexable":true}}