{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"2213464-1","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"2213464-1","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/2213464-1","factsUrl":"https://icsourcedirect.com/api/mcp/products/2213464-1","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity Nector M receptacle housing for pin contacts, 3 positions, cable/wire to cable/wire, crimp termination, panel mount, IP67, 20A, 400V, keyed, black PBT GF housing.","salesMarkdown":"## Sealed 3-Position Power Receptacle Housing for Panel-Mount Harness Interconnects The IP67 rating means the mated assembly is dust-tight and protected against temporary water immersion, suiting it for outdoor equipment, agricultural machinery, and underhood automotive harness junctions where moisture ingress would otherwise corrode the circuit. Rated at 20 A per circuit with a 400 V voltage ceiling, this housing supports power-level distribution — think battery feeds, motor drives, or lighting circuits — not signal-level duty. The keyed housing prevents cross-mating with other connectors in the same harness bundle, a practical safeguard when multiple Nector M receptacles share a panel. The panel-mount feature lets you bolt the receptacle to an enclosure wall, creating a fixed mating point for the cable-side plug. ## 20 A per Circuit — Sizing for Power Distribution, Not Signal The 20 A per-circuit rating at 400 V places this housing in the power interconnect class. Each contact in the mated pair must carry that current without exceeding the temperature rise limits of the PBT housing — the glass fill helps pull heat away from the contact beam. The 400 V rating gives enough creepage margin for the 3.00 mm-ish contact spacing typical of this power class, though the exact pitch is not listed here. For a 3-circuit harness carrying 20 A per leg, the total bundle current is 60 A; the housing's single-row layout keeps the wire bundle compact at the panel exit. ## IP67 Sealing and Panel-Mount Installation The IP67 rating is achieved when the receptacle housing is mated with the corresponding Nector M plug and the panel gasket is compressed against the mounting surface. The seal protects the contacts from dust, mud, and temporary submersion to 1 metre for 30 minutes. The panel-mount feature typically uses a locking nut or clip that clamps the housing to a cut-out in the enclosure wall — the keying feature ensures the plug can only be inserted in one orientation, which matters when the connector is behind a panel where you cannot see the cavity alignment. ## Crimp Termination and Contact Compatibility The 3-position layout is a single-row configuration; the keying feature prevents inserting the plug into the wrong row position or a different Nector M variant on the same panel. The black PBT housing provides a visual identifier against other colours in the series.","metaTitle":"TE Connectivity 2213464-1 Nector M Receptacle Housing, 3-pos","metaDescription":"TE Connectivity 2213464-1 Nector M receptacle housing, 3-position, 20A, 400V, IP67 sealed, panel mount, keyed. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Wire-to-Board Connectors"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Pitch":"-","Style":"Cable/Wire to Cable/Wire","Series":"Nector M","Package":"Bulk","Features":"Keyed","Wire Gauge":"-","Termination":"Crimp","Housing Color":"Black","Mating Cycles":"-","Mounting Type":"Panel Mount","Connector Type":"Receptacle Housing for Pin Contact","Contact Finish":"-","Fastening Type":"-","Product Status":"Active","Voltage Rating":"400V","lifecycle_stage":"unknown","Contact Material":"-","Housing Material":"Polybutylene Terephthalate (PBT), Glass Filled","Ingress Protection":"IP67 - Dust Tight, Waterproof","Base Product Number":"2213464","Number of Positions":"3","Current Rating (Amps)":"20A","Operating Temperature":"-40°C ~ 85°C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4677","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/baa2f13cca598f0803c215015f6acf4e.pdf","sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/2213464-1/alternatives.json"},"ai":{"faq":[{"question":"Does 2213464-1 include contacts?","answer":"No, the 2213464-1 is a receptacle housing only. It accepts separately ordered Nector M pin contacts that are crimped onto the wire before insertion into the housing cavity."},{"question":"Is 2213464-1 a plug or a receptacle?","answer":"The 2213464-1 is a receptacle housing for pin contacts. It is the panel-mount, fixed half of the Nector M interconnect system, designed to mate with the corresponding plug housing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/2213464-1","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/2213464-1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}