{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"2227103-2","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"2227103-2","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/2227103-2","factsUrl":"https://icsourcedirect.com/api/mcp/products/2227103-2","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity ZQSFP+ cage, ganged 1x2, integrated heat sink, press-fit termination, through-hole right-angle, EMI shielded, tray package.","salesMarkdown":"## ZQSFP+ Cage with Integrated Heat Sink — 1x2 Ganged, Press-Fit This is the cage-and-heatsink assembly that sits on the PCB edge, accepting two ZQSFP+ plug modules side-by-side. The press-fit termination means the cage presses into plated through-holes without solder — a common choice for backplane and high-density line cards where rework and signal integrity matter. EMI shielding is built into the cage body to contain the radiated noise from 25+ Gbps lanes. ## Why the Integrated Heat Sink Matters The heat sink is part of the cage assembly — not a separate clip-on. That saves a BOM line and eliminates the tolerance stack between a loose heatsink and the module top. For a 1x2 ganged cage, the single heatsink spans both module positions, sharing the thermal mass across adjacent ports. The press-fit pins also conduct some heat into the PCB ground plane, but the primary thermal path is the heatsink-to-module interface. Press-fit (compliant-pin) termination avoids the thermal cycle of wave or reflow soldering. The pin compliance takes up board thickness variation and CTE mismatch between the cage and the PCB. For a right-angle through-hole part, the press-fit pins are on the back side of the cage body — the board footprint needs plated through-holes sized to the pin cross-section, typically with a finished hole diameter that allows the compliant section to compress on insertion. No solder paste, no reflow profile to qualify.","metaTitle":"TE 2227103-2 ZQSFP+ Cage, 1x2 Ganged with Heat Sink","metaDescription":"TE Connectivity 2227103-2 ZQSFP+ cage, ganged 1x2 with integrated heat sink, press-fit termination, right-angle through-hole, EMI shielded.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Pluggable Terminal Blocks"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Series":"-","Package":"Tray","Features":"EMI Shielded","Termination":"Press-Fit","Mounting Type":"Through Hole, Right Angle","Connector Type":"ZQSFP+","Contact Finish":"-","Product Status":"Active","Connector Style":"Cage, Ganged (1 x 2) with Heat Sink","lifecycle_stage":"unknown","Base Product Number":"2227103","Number of Positions":"-","Contact Finish Thickness":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$35.0400","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/2227103-2/alternatives.json"},"ai":{"faq":[{"question":"Does 2227103-2 come with a heat sink?","answer":"Yes, the cage is ganged 1x2 with an integrated heat sink — the heatsink is part of the assembly, not a separate add-on."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/2227103-2","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/2227103-2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:04:01.345Z","lastPublished":"2026-07-22T18:04:01.345Z","indexable":true}}