{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"2408014-1","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"2408014-1","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/2408014-1","factsUrl":"https://icsourcedirect.com/api/mcp/products/2408014-1","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity 2408014-1, Blind-Mate Coaxial series, between-series adapter, SMA jack to coaxial switch plug, 50 Ohm impedance, 6 GHz max frequency, straight body, panel mount with flange, 500 mating cycles, stainless steel body, gold-plated beryllium copper center contacts.","salesMarkdown":"The TE Connectivity 2408014-1 is a between-series coaxial adapter that converts an SMA jack interface to a coaxial switch plug. It belongs to the Blind-Mate Coaxial series and is designed for panel-mount applications using the threaded flange. The body is machined from stainless steel, and the center contacts — beryllium copper with gold plating — handle the RF path. This is a straight-body adapter, meaning the signal path runs straight through without an angle change. ## RF Performance and Key Ratings The 6 GHz frequency ceiling covers the common sub-6 GHz bands used in wireless infrastructure, antenna feed networks, and lab instrumentation. The 500 mating cycles rating is solid for a panel-mount adapter that gets swapped during reconfiguration or test setup changes; it is not a one-time-install part. The stainless steel body resists corrosion in humid or industrial environments better than nickel-plated brass alternatives. The PTFE dielectric holds stable impedance across the temperature range. The gold-plated beryllium copper center contacts give good cycle life and low passive intermodulation — important when the adapter sits in a receive path. The fastening combines push-pull on the coaxial switch side and threaded on the SMA side, so the install is a mix of hand-tighten and click-in. ## Mating and Installation The SMA side (convert from) is a jack with a female socket — it mates with standard SMA plugs on cables or bulkhead jacks. The panel mount uses the flange with two screw holes; the adapter body passes through the panel cutout and the flange sits flush against the panel face. The push-pull retention on the switch side means it clicks into place without threads, while the SMA side uses the standard 1/4-36 threaded coupling.","metaTitle":"TE 2408014-1 SMA to Coaxial Switch Adapter, 50 Ohm, 6 GHz","metaDescription":"TE 2408014-1 between-series adapter, SMA jack to coaxial switch plug. 50 Ohm, 6 GHz, 500 mating cycles. Stainless steel body, gold-plated contacts.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Style":"Straight","Series":"Blind-Mate Coaxial","Package":"Bag","Features":"-","Includes":"-","Impedance":"50Ohm","Body Finish":"-","Adapter Type":"Plug to Jack","Body Material":"Stainless Steel","Center Gender":"Female to Male","Mating Cycles":"500","Mounting Type":"Panel Mount","Adapter Series":"SMA to Coaxial Switch","Fastening Type":"Push-Pull, Threaded","Insertion Loss":"-","Product Status":"Active","Conversion Type":"Between Series","Frequency - Max":"6 GHz","lifecycle_stage":"unknown","Mounting Feature":"Flange","Ingress Protection":"-","Base Product Number":"2408014","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-40°C~85°C","Center Contact Plating":"Gold","Center Contact Material":"Beryllium Copper","Convert To (Adapter End)":"Coaxial Switch Plug, Male Pin","Convert From (Adapter End)":"SMA Jack, Female Socket"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$207.9300","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/432ee9d07d4b25f8923ab766c5b3d26d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the impedance of the 2408014-1?","answer":"The 2408014-1 is a 50 Ohm adapter, matching the standard impedance for RF test equipment, telecom infrastructure, and antenna systems."},{"question":"How many mating cycles does the 2408014-1 support?","answer":"The 2408014-1 is rated for 500 mating cycles, making it suitable for test setups and applications where the adapter is swapped during reconfiguration."},{"question":"Is the 2408014-1 compatible with standard SMA cables?","answer":"Yes, the SMA side of the adapter is a jack with a female socket, mating with standard SMA plugs on cables or bulkhead connectors."},{"question":"What is the frequency range of the 2408014-1?","answer":"The adapter is rated to 6 GHz maximum frequency, covering the sub-6 GHz bands common in wireless and RF applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/2408014-1","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/2408014-1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}