{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3-647106-6","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"3-647106-6","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/3-647106-6","factsUrl":"https://icsourcedirect.com/api/mcp/products/3-647106-6","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity AMP Connectors MTA-100 series, 3-647106-6 — 6-position single-row SMD header, 0.100\" (2.54mm) pitch, tin-plated male square pins, shrouded 1 wall, UL94 V-0, -55°C to 105°C, RoHS.","salesMarkdown":"The single-wall shroud polarizes the mating face but leaves the top of the pins exposed — enough guidance for a technician to seat the receptacle by feel, but less physical protection than a full shroud. In a panel where the header sees occasional cable dress changes, that's fine; in a high-vibration harness, the latch does the retention work. Tin-plated mating surface and tin-plated posts. At the current rating that varies by wire gauge, tin is adequate for moderate mating cycles — budget a few dozen mates before the contact finish wears. For a production assembly that mates once and stays, tin is the economical call. ## Surface-mount assembly — what the SMD termination means for the board The SMD termination places the header flat on the PCB pads — no through-hole stubs, no secondary wave-solder step. The insulation height of 0.347\" (8.81 mm) sets the z-height budget above the board surface; the mating pin length of 0.290\" (7.37 mm) is the engagement depth for the receptacle contact. Because the header is surface-mount, the board-side footprint is a row of six solder pads at 2.54 mm pitch. No plated through-holes to route around — the routing density under the header is better than a through-hole equivalent, but the SMD joints carry the full mechanical load of the cable strain. A board lock would help here; this part does not have one (shows no board lock feature), so the solder fillet alone resists peel forces from the cable. ## Active production — sourcing the 3-647106-6 today The part is RoHS compliant. ## Mating with MTA-100 receptacles — what fits This header mates with standard MTA-100 IDC and crimp receptacles (: Board to Cable/Wire). The 0.100\" pitch, 6-position single-row layout, and square 0.025\" pins are the MTA-100 interface.","metaTitle":"TE 3-647106-6 MTA-100 Header SMD 6 Pos 2.54mm Pin Strip","metaDescription":"TE Connectivity MTA-100 6-position single-row SMD header, 0.100\" pitch, tin-plated contacts, shrouded 1 wall, UL94 V-0. Active production.","metaKeywords":null},"attributes":{"series":"MTA-100","packageCase":null,"mountingType":null,"rohsStatus":"RoHS Compliant","productStatus":"Active","categoryPath":["Pin Headers, Sockets & Housings","Pin Headers"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Style":"Board to Cable/Wire","Series":"MTA-100","Package":"Bulk","Features":"-","Shrouding":"Shrouded - 1 Wall","Termination":"Solder","Applications":"General Purpose","Contact Type":"Male Pin","Contact Shape":"Square","Mounting Type":"Surface Mount","Connector Type":"Header","Fastening Type":"-","Number of Rows":"1","Pitch - Mating":"0.100\\\" (2.54mm)","Product Status":"Active","Voltage Rating":"250VAC","lifecycle_stage":"unknown","Contact Material":"Copper Alloy","Insulation Color":"Black","Insulation Height":"0.347\\\" (8.81mm)","Ingress Protection":"-","Base Product Number":"647106","Insulation Material":"Polyamide (PA46), Nylon 4/6","Number of Positions":"6","Row Spacing - Mating":"-","Contact Finish - Post":"Tin","Contact Length - Post":"-","Current Rating (Amps)":"Varies by Wire Gauge","Operating Temperature":"-55°C ~ 105°C","Mated Stacking Heights":"-","Overall Contact Length":"-","Contact Finish - Mating":"Tin","Contact Length - Mating":"0.290\\\" (7.37mm)","Number of Positions Loaded":"All","Material Flammability Rating":"UL94 V-0","Contact Finish Thickness - Post":"-","Contact Finish Thickness - Mating":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.4600","priceTiers":[{"qty":1,"price":"$2.46000","currency":"USD"},{"qty":10,"price":"$2.19500","currency":"USD"},{"qty":100,"price":"$1.98320","currency":"USD"},{"qty":500,"price":"$1.79382","currency":"USD"},{"qty":1000,"price":"$1.60441","currency":"USD"},{"qty":5000,"price":"$1.41500","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/3-647106-6/alternatives.json"},"ai":{"faq":[{"question":"Can 3-647106-6 mate with standard MTA-100 receptacles?","answer":"Yes. The 0.100\" pitch, 6-position single-row layout, and square male pins are the MTA-100 interface. The single-wall shroud accepts the receptacle's locking latch. Verify the receptacle position count and latch style match."},{"question":"What is the recommended PCB layout for 3-647106-6?","answer":"The insulation height of 0.347\" (8.81 mm) and mating pin length of 0.290\" (7.37 mm) are the board-side clearance dimensions. No board lock is present, so the solder pads bear the cable strain."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/3-647106-6","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/3-647106-6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}