{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"414363-3","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"414363-3","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/414363-3","factsUrl":"https://icsourcedirect.com/api/mcp/products/414363-3","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity SMB plug, female socket, 50 Ohm, 3 GHz, RG-174/188/316, right-angle, solder contact, snap-on, nickel body, bulk.","salesMarkdown":"It comes as a three-piece assembly — the connector body, an end cap, and a crimp ferrule — so the kit covers the full cable termination in one BOM line. The right-angle body keeps the cable routed parallel to the board or panel face, which matters when the enclosure height is tight. The 3 GHz ceiling covers ISM bands and GPS L-band. Insertion loss runs 0.6 dB across the band. Cable compatibility is limited to RG-174, RG-188, and RG-316 — the three common 50 Ohm small-diameter coax types. The crimp ferrule and centre solder termination match the braid and centre conductor dimensions of those cables. The body is zinc with a nickel finish — nickel gives good corrosion resistance for indoor equipment racks and test bench environments, though it is not rated for salt-spray exposure. Gold on the mating interface prevents oxidation build-up that would raise the contact resistance in a low-level RF path. That temperature span covers automotive under-hood and outdoor telecom cabinet environments, though the nickel body limits the corrosion resistance in coastal or chemical-exposure settings. Mating is snap-on — push until the detent clicks. The snap-on coupling is faster than a threaded SMA and adequate for applications where vibration is moderate and the cable is strain-relieved separately. The right-angle body means the cable exits 90° from the mating axis, which is the typical orientation for board-edge or panel-mount SMB jacks. Termination is a two-step process: solder the centre conductor to the contact pin, then crimp the ferrule over the cable braid. The shield termination is crimp, not solder, which gives a more consistent impedance transition at the cable-to-connector interface. The kit includes the ferrule, so there is no separate ferrule order.","metaTitle":"TE Connectivity 414363-3 SMB Plug, 50 Ohm, 3 GHz","metaDescription":"TE Connectivity 414363-3 SMB plug, female socket, 50 Ohm impedance, 3 GHz max, 0.6 dB insertion loss. For RG-174/188/316 cable.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors","RF Cable Assemblies"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Series":"-","Package":"Bulk","Features":"-","Includes":"3 pcs - 1 Connector, 1 End Cap, 1 Ferrule","Impedance":"50 Ohms","Body Finish":"Nickel","Cable Group":"RG-174, 188, 316","Body Material":"Zinc","Housing Color":"Silver","Mating Cycles":"500","Mounting Type":"Free Hanging (In-Line), Right Angle","Connector Type":"Plug, Female Socket","Fastening Type":"Snap-On","Insertion Loss":"0.6dB","Product Status":"Active","Voltage Rating":"335 V","Connector Style":"SMB","Frequency - Max":"3 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"-","Ingress Protection":"-","Shield Termination":"Crimp","Base Product Number":"414363","Contact Termination":"Solder","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-65°C ~ 165°C","Center Contact Plating":"Gold","Center Contact Material":"Beryllium Copper"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.3000","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/73f68325ac03c6c7a09efa009f063a9d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the impedance of 414363-3?","answer":"The 414363-3 is a 50 Ohm SMB plug — the standard impedance for RF test, telecom, and antenna systems."},{"question":"What cable types are compatible with 414363-3?","answer":"The 414363-3 is designed for RG-174, RG-188, and RG-316 coaxial cables. Using other cable types will shift the impedance."},{"question":"What is the insertion loss of the 414363-3?","answer":"The specified insertion loss is 0.6 dB across the rated frequency range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/414363-3","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/414363-3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}