{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5225555-5","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"5225555-5","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/5225555-5","factsUrl":"https://icsourcedirect.com/api/mcp/products/5225555-5","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity 5225555-5 TNC plug, male pin, 50 Ohm, 11 GHz, crimp termination, RG-141/141A cable group, nickel body, gold center contact, weatherproof, -65°C to 165°C, 500 mating cycles, bulk kit includes connector + contact + ferrule.","salesMarkdown":"The TE Connectivity 5225555-5 is a TNC plug kit — a threaded, weatherproof RF connector built for RG-141 and RG-141A cable. It ships as a three-piece assembly: the nickel-plated brass body, the gold-plated center contact, and the crimp ferrule. The 50 Ohm impedance and 11 GHz frequency ceiling put it in the upper band of the TNC family, good for outdoor antenna feeds, test equipment, and base-station cabling where the bayonet-style BNC would rattle loose under vibration. The 11 GHz maximum frequency means it holds a clean signal path up through the X-band lower edge; above that the VSWR climbs and the threaded interface becomes a stub. The 500 mating cycles are typical for a threaded RF connector — the gold-on-nickel center contact resists wear through repeated field swaps, but the thread itself will show galling before the contact gives out. The weatherproof rating means the interface seal keeps moisture out when mated — it is not a submersible IP68, but it handles rain, condensation, and splash in outdoor enclosures. The PTFE dielectric holds that temperature span without melting or cracking. This kit is dimensioned for RG-141 cable — the ferrule ID and the center-contact pin diameter match that cable's dielectric OD and center conductor gauge. Crimping the shield ferrule and the center contact in two separate dies gives a gas-tight termination that holds the 50 Ohm impedance through the transition. The threaded fastening locks the plug into a TNC jack; the coupling nut torque should be hand-tight plus a quarter turn with a wrench — over-torquing deforms the PTFE and shifts the impedance.","metaTitle":"TE 5225555-5 TNC Plug Kit, 50 Ohm, 11 GHz, RG-141","metaDescription":"TE 5225555-5 TNC plug kit, 50 Ohm, 11 GHz max, crimp termination for RG-141/141A. Includes connector, contact, ferrule. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors","RF Cable Assemblies"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Series":"-","Package":"Bulk","Features":"-","Includes":"3 pcs - 1 Connector, 1 Contact, 1 Ferrule","Impedance":"50 Ohms","Body Finish":"Nickel","Cable Group":"RG-141, 141A","Body Material":"Brass","Housing Color":"Silver","Mating Cycles":"500","Mounting Type":"Free Hanging (In-Line)","Connector Type":"Plug, Male Pin","Fastening Type":"Threaded","Insertion Loss":"-","Product Status":"Active","Voltage Rating":"500 V","Connector Style":"TNC","Frequency - Max":"11 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"-","Ingress Protection":"Weatherproof","Shield Termination":"Crimp","Base Product Number":"5225555","Contact Termination":"Crimp","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-65°C ~ 165°C","Center Contact Plating":"Gold","Center Contact Material":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$49.9300","stockQuantity":37,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Does the 5225555-5 include the ferrule and contact?","answer":"Yes — the kit includes three pieces: the connector body, one gold-plated center contact, and one crimp ferrule. No additional parts are needed to terminate the cable."},{"question":"What cable works with the 5225555-5?","answer":"The 5225555-5 is designed for RG-141 and RG-141A cable. The ferrule and center contact are sized to match that cable group's dimensions. It is not compatible with RG-174 or RG-58 without changing the crimp components."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"isd-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/5225555-5","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/5225555-5 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:46:37.382Z","lastPublished":"2026-07-22T19:46:37.382Z","indexable":true}}