{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5414168-3","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"5414168-3","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/5414168-3","factsUrl":"https://icsourcedirect.com/api/mcp/products/5414168-3","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity TNC jack, 50 Ohm, 11 GHz, panel mount bulkhead, crimp termination, RG-174/188/316, kit includes 6 pcs.","salesMarkdown":"The TE Connectivity 5414168-3 is a TNC jack, female socket, built for 50 Ohm systems and rated to 11 GHz. It comes as a bulkhead-mount kit — panel-mount with a front-side nut — and includes all six pieces needed for one install: the connector body, a crimp contact, a ferrule, a gasket, a lockwasher, and a nut. The zinc body gets a nickel finish, the beryllium copper centre contact is gold-plated, and the dielectric is polymethylpentene (PMP). This is the kind of RF interconnect you spec for a fixed station antenna feed or a test point where you want threaded reliability and a clean 50 Ohm match through 11 GHz. This jack accepts RG-174, RG-188, and RG-316 coax — three common small-diameter cables for RF up through low microwave bands. The kit format means you do not have to hunt down the right ferrule or gasket separately; the bag has one of each per connector. If you are building a harness for RG-316, this is a straight match — no adapter ring or alternative ferrule needed. The 11 GHz ceiling is the practical limit; above that, the TNC interface geometry starts to degrade the return loss. For a 2.4 GHz or 5.8 GHz Wi-Fi backhaul, or a GPS antenna feed at 1.5 GHz, this connector has headroom to spare. The 500-cycle mating life is solid for a threaded RF connector — the gold-on-beryllium-copper centre contact handles the wear, and the nickel body finish resists corrosion in outdoor or industrial cabinets.","metaTitle":"TE Connectivity 5414168-3 TNC Jack, 50 Ohm, 11 GHz, Bulkhead","metaDescription":"TE Connectivity 5414168-3 TNC jack, 50 Ohm, 11 GHz max, panel mount bulkhead kit. Includes connector, contact, ferrule, gasket, lockwasher, nut.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors","RF Cable Assemblies"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Series":"-","Package":"Bulk","Features":"-","Includes":"6 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Lockwasher, 1 Nut","Impedance":"50 Ohms","Body Finish":"Nickel","Cable Group":"RG-174, 188, 316","Body Material":"Zinc","Housing Color":"Silver","Mating Cycles":"500","Mounting Type":"Panel Mount","Connector Type":"Jack, Female Socket","Fastening Type":"Threaded","Insertion Loss":"-","Product Status":"Active","Voltage Rating":"500 V","Connector Style":"TNC","Frequency - Max":"11 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"Bulkhead - Front Side Nut","Ingress Protection":"-","Shield Termination":"Crimp","Base Product Number":"5414168","Contact Termination":"Crimp","Dielectric Material":"Polymethylpentene (PMP)","Operating Temperature":"-65°C ~ 165°C","Center Contact Plating":"Gold","Center Contact Material":"Beryllium Copper"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.6800","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/c21e89844042953fe163b14e8c453cf4.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What cables are compatible with 5414168-3?","answer":"This TNC jack is designed for RG-174, RG-188, and RG-316 coax cables. Both the centre contact and the shield terminate by crimp, and the kit includes the correct ferrule for these cable types."},{"question":"What is the frequency range of 5414168-3?","answer":"The 5414168-3 is rated to 11 GHz maximum frequency at 50 Ohm impedance. It is a matched-impedance TNC interface, so performance is clean through the full band up to that ceiling."},{"question":"Is 5414168-3 compatible with RG-316 cable?","answer":"Yes — RG-316 is one of the three cable types listed for this connector, along with RG-174 and RG-188. The crimp ferrule and centre contact in the kit are sized for these cables."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/5414168-3","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/5414168-3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}