{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"569336-3","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"569336-3","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/569336-3","factsUrl":"https://icsourcedirect.com/api/mcp/products/569336-3","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity CHAMP series backshell, 50 positions, 120° cable exit, two-piece plastic construction, unshielded, with strain relief, bulk pack, black.","salesMarkdown":"The TE Connectivity 569336-3 is a 50-position, two-piece plastic backshell from the CHAMP series, designed to fit over the mating end of a CHAMP 50-pin connector. It routes the cable at a 120° angle from the connector axis — a deliberate geometry for keeping the ribbon cable flat against the panel or chassis wall rather than forcing a 90° bend that can stress the IDC termination. The integrated strain relief clamps the flat ribbon cable so that tugging on the harness pulls against the shell, not the contacts. This is a backshell, not a connector — it provides cable management, strain relief, and mechanical protection for the termination area of a mated CHAMP pair. ## Cable Exit Angle and Routing The 120° cable exit is the defining selection parameter on this part. A standard 180° backshell sends the cable straight out the back — fine for straight-through panel feed but a problem when the connector sits near a cabinet wall. A 90° exit folds the cable tight to the board, but the bend radius on a 50-conductor flat ribbon cable can exceed the connector's own height. The 120° exit splits the difference: the cable leaves at a shallow angle that clears the connector body and lets the ribbon lie flat against the mounting surface without a sharp crease. For a technician routing a CHAMP harness inside a cabinet, this angle saves a cable tie and a strain point. ## Construction and Compatibility Molded from black thermoplastic, the two-piece shell clamshells around the CHAMP connector body and the ribbon cable entry point. The strain relief is built into the back end — no separate clamp to lose. It is unshielded, so this is the right choice for signal-level CHAMP applications (peripheral I/O, internal ribbon harnesses) where you do not need a metal shell for EMI containment. It mates with any standard CHAMP 50-pin plug or receptacle that uses the same mounting hole pattern — the backshell screws into the connector's jack-screw or slide-lock hardware. Position count is fixed at 50; a 50-position CHAMP connector is the only fit.","metaTitle":"TE CHAMP 569336-3 Backshell, 50 Pos, 120°, Active","metaDescription":"TE Connectivity CHAMP 569336-3 two-piece backshell, 50 positions, 120° cable exit, flat ribbon cable, strain relief. ROHS3 compliant, active lifecycle.","metaKeywords":null},"attributes":{"series":"CHAMP","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["D-Sub & D-Shaped Connectors","D-Sub Backshells & Hoods"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Color":"Black","Series":"CHAMP","Package":"Bulk","Plating":"-","Features":"-","Hardware":"Strain Relief","Material":"Thermoplastic","Shielding":"Unshielded","Cable Exit":"120°","Cable Type":"Flat","Accessory Type":"Two Piece Backshell","Product Status":"Active","lifecycle_stage":"unknown","Primary Material":"Plastic","Base Product Number":"569336","Number of Positions":"50","Compatible D-Sub Size":"-","Compatible Shell Size":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.4600","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$3.46000","currency":"USD"},{"qty":10,"price":"$3.08400","currency":"USD"},{"qty":25,"price":"$3.06800","currency":"USD"},{"qty":50,"price":"$3.03660","currency":"USD"},{"qty":100,"price":"$2.73760","currency":"USD"},{"qty":250,"price":"$2.72184","currency":"USD"},{"qty":500,"price":"$2.51732","currency":"USD"},{"qty":1000,"price":"$2.24986","currency":"USD"},{"qty":2500,"price":"$2.07679","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/dc2eb8c85d7320e393b1e36aaea6f91e.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is the 569336-3 backshell compatible with CHAMP 50-pin connectors?","answer":"Yes. The 569336-3 is a 50-position backshell designed specifically for the TE CHAMP series. It fits any standard CHAMP 50-pin plug or receptacle that uses the same mounting hardware pattern — the backshell screws into the connector's jack-screw or slide-lock points."},{"question":"Does the 569336-3 support flat ribbon cable?","answer":"Yes. The backshell is designed for flat ribbon cable, with an integrated strain relief that clamps the ribbon to prevent pull forces from reaching the IDC termination inside the CHAMP connector."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/569336-3","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/569336-3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}