{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"68022-414HLF","brand":"Amphenol","brandSlug":"amphenol","productSlug":"68022-414HLF","canonicalUrl":"https://icsourcedirect.com/amphenol/68022-414HLF","factsUrl":"https://icsourcedirect.com/api/mcp/products/68022-414HLF","rawCanonicalId":null},"summary":{"shortDescription":"Amphenol BERGSTIK® II, Header, Board to Board, 14 Positions, 0.100\" (2.54mm) Pitch, 2 Rows, Through Hole, Right Angle, Tin Contacts, 5A, UL94 V-0.","salesMarkdown":"The Amphenol 68022-414HLF is a 14-circuit unshrouded male pin header from the BERGSTIK® II series, designed for board-to-board stacking where the mating receptacle sits parallel to the PCB. The 0.100\" (2.54 mm) pitch and 0.100\" row spacing match the legacy 0.1-inch grid layout that dominates prototyping, backplane, and peripheral card interconnects. Right-angle through-hole termination places the pin rows parallel to the board edge, which suits card-edge mezzanine or riser-card applications where the connector must sit flush against the enclosure wall. ## Key ratings and what they mean for the fit Rated 5 A per contact with tin-on-tin mating surfaces. The 100.0 µin (2.54 µm) tin plating on the mating side is thick enough for occasional mating cycles in a permanent-install board stack — think a PSU card plugged into a motherboard once at build time and left there. For frequent reconnection (test fixtures, field-swappable cards), the tin surface frets under vibration and the contact resistance drifts; a gold-plated sibling in the same series would be the better call for repeated mate cycles. The UL94 V-0 black housing carries the flame rating required for equipment inside an enclosure. ## Mounting and termination Through-hole right-angle mounting with a 0.110\" (2.79 mm) solder post length — the tails sit flush for wave or hand soldering on a standard 0.062\" board. The 0.318\" (8.08 mm) mating pin length gives enough reach to engage a shrouded receptacle housing without bottoming out. Unshrouded, so there is no polarization key: the board layout must enforce orientation, and the mating half must be the matching BERGSTIK II receptacle or a shrouded header that accepts the 0.100\" grid. ## How it compares to the 68022-414BLF The 68022-414BLF carries gold flash (light gold) on the mating contacts versus the 100.0 µ\" tin on this -HLF variant. Both share the identical 14-position layout, 0.100\" pitch, right-angle through-hole footprint, and UL94 V-0 housing. The plating difference governs the duty: the -HLF (tin) is a cost-optimized choice for one-time or low-cycle board stacks; the -BLF (gold) handles repeated mating cycles and corrosive environments better. Board layout and BOM position count are identical — the swap is purely a plating-grade decision.","metaTitle":"Amphenol BERGSTIK II 68022-414HLF Header, 14 Pos","metaDescription":"Amphenol BERGSTIK® II 68022-414HLF unshrouded header, 14 positions, 0.100\" (2.54 mm) pitch, right-angle through-hole, tin-plated contacts rated 5 A, UL94 V-0.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Pin Headers, Sockets & Housings"],"specifications":{"Mfr":"Amphenol ICC (FCI)","Style":"Board to Board","Series":"BERGSTIK® II","Package":"Bag","Features":"-","Shrouding":"Unshrouded","Termination":"Solder","Applications":"-","Contact Type":"Male Pin","Contact Shape":"Square","Mounting Type":"Through Hole, Right Angle","Connector Type":"Header","Fastening Type":"Push-Pull","Number of Rows":"2","Pitch - Mating":"0.100\\\" (2.54mm)","Product Status":"Active","Voltage Rating":"110V","lifecycle_stage":"unknown","Contact Material":"Phosphor Bronze","Insulation Color":"Black","Insulation Height":"0.240\\\" (6.10mm)","Ingress Protection":"-","Base Product Number":"68022","Insulation Material":"-","Number of Positions":"14","Row Spacing - Mating":"0.100\\\" (2.54mm)","Contact Finish - Post":"Tin","Contact Length - Post":"0.110\\\" (2.79mm)","Current Rating (Amps)":"5A","Operating Temperature":"-","Mated Stacking Heights":"-","Overall Contact Length":"-","Contact Finish - Mating":"Tin","Contact Length - Mating":"0.318\\\" (8.08mm)","Number of Positions Loaded":"All","Material Flammability Rating":"UL94 V-0","Contact Finish Thickness - Post":"-","Contact Finish Thickness - Mating":"100.0µin (2.54µm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.4300","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/f07eb009696ffe298bd4359a478f2e44.pdf","sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/68022-414HLF/alternatives.json"},"ai":{"faq":[{"question":"What is the exact pitch of the 68022-414HLF?","answer":"The mating pitch is 0.100\" (2.54 mm) with a row-to-row spacing of 0.100\" (2.54 mm) — standard 0.1-inch grid."},{"question":"What is the difference between the 68022-414HLF and the 68022-414BLF?","answer":"The -HLF uses 100.0 µ\" tin on the mating contacts; the -BLF uses gold flash. The board footprint, position count, and pin layout are identical — the choice is between tin for cost-sensitive fixed installations and gold for higher mating-cycle or corrosive environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/amphenol/68022-414HLF","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/amphenol/68022-414HLF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-23T20:41:44.623Z","lastPublished":"2026-07-23T20:41:44.623Z","indexable":true}}