{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"745229-7","brand":"TE Connectivity AMP Connectors","brandSlug":"te-connectivity-amp-connectors","productSlug":"745229-7","canonicalUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/745229-7","factsUrl":"https://icsourcedirect.com/api/mcp/products/745229-7","rawCanonicalId":null},"summary":{"shortDescription":"TE Connectivity AMPLIMITE HDP-20 series, stamped pin contact, 745229-7, 18-22 AWG, gold flash, crimp termination, bulk.","salesMarkdown":"## Stamped Pin Contact for AMPLIMITE HDP-20 D-Sub Connectors It is the male (pin) half of the crimp-contact system, designed to be terminated to 18-22 AWG wire and inserted into the standard HDP-20 male connector housing. The stamped construction keeps per-contact cost low while maintaining the dimensional consistency needed for reliable crimp termination across the full wire range. The brass base material gives good spring properties for the crimp barrel. ## Wire Range and Termination Accepts 18-22 AWG stranded or solid wire with the correct crimp tooling. The stamped barrel is designed for a four-indent crimp profile that gives a gas-tight connection across the full conductor cross-section. Use the TE-certified hand crimp tool (e.g., 58433-3 or 58433-2) or a pneumatic applicator for production volumes. The crimp barrel is uninsulated — a heat-shrink boot or backshell strain relief is recommended where the wire exits the connector shell.","metaTitle":"TE AMPLIMITE HDP-20 745229-7, Stamped Pin Contact, 18-22 AWG","metaDescription":"TE Connectivity 745229-7 AMPLIMITE HDP-20 stamped pin contact, gold flash, 18-22 AWG, crimp termination. Active lifecycle, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Circular Connectors","Multi-Purpose Circular"],"specifications":{"Mfr":"TE Connectivity AMP Connectors","Type":"Stamped","Series":"AMPLIMITE HDP-20","Package":"Bulk","Wire Gauge":"18-22 AWG","Pin or Socket":"Pin","Contact Finish":"Gold","Product Status":"Active","lifecycle_stage":"unknown","Contact Material":"Brass","Base Product Number":"745229","Contact Termination":"Crimp","Contact Finish Thickness":"Flash"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.3200","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/ace512c9889fd753faaaf73d2459e766.pdf","sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/745229-7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy 745229-7?","answer":"The 745229-7 is sourced to order against an RFQ through independent distribution. Submit a quote request for current pricing and availability — no stock-holding claim is made here, and availability is confirmed at quote time."},{"question":"Is 745229-7 a pin or socket?","answer":"The 745229-7 is a pin (male) contact. It mates with the corresponding socket contact in the AMPLIMITE HDP-20 series and is inserted into the male connector housing (the plug side of the D-sub pair)."},{"question":"What is the wire gauge range for 745229-7?","answer":"The 745229-7 accepts 18-22 AWG wire. This is the standard range for signal-level D-sub contacts in the HDP-20 family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/te-connectivity-amp-connectors/745229-7","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/te-connectivity-amp-connectors/745229-7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:51:40.457Z","lastPublished":"2026-07-22T18:51:40.457Z","indexable":true}}