{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BNC(75)-PR(6)-PC-12G","brand":"Hirose Electric Co Ltd","brandSlug":"hirose-electric-co-ltd","productSlug":"BNC~175~2-PR~16~2-PC-12G","canonicalUrl":"https://icsourcedirect.com/hirose-electric-co-ltd/BNC~175~2-PR~16~2-PC-12G","factsUrl":"https://icsourcedirect.com/api/mcp/products/BNC(75)-PR(6)-PC-12G","rawCanonicalId":null},"summary":{"shortDescription":"Hirose BNC(75)-PR(6)-PC-12G, 75 Ohm BNC jack, female socket, panel mount with flange, bayonet lock, 1 port, 12 GHz max frequency, gold-plated center contact, nickel body.","salesMarkdown":"The Hirose BNC(75)-PR(6)-PC-12G is a 75 Ohm BNC jack, female socket, designed for the 12 GHz frequency ceiling that makes it suitable for 12G-SDI and other high-data-rate serial digital video paths. The 75 Ohm impedance is the standard for broadcast video infrastructure, and the 12 GHz max frequency means this connector handles 4K and 8K uncompressed video without choking the return loss at the upper band edge. The bayonet lock gives a positive, quarter-turn mate that stays put under cable strain — a half-turn loose on a 12G link and you're chasing sparkles on the monitor. The panel mount uses a flange with through-hole solder termination for the shield, and the center contact is solder-terminated as well. This is a one-port jack, so it's a single connection point on a bulkhead or chassis, not a feed-through. ## Wiring and Termination: Solder Both Ends There is no crimp option on this jack — it's a solder-only install. The PTFE dielectric handles soldering heat without melting or shifting, but take care not to overheat the center pin and wick solder into the dielectric interface, which will shift the impedance. The flange mount gives four screw holes for panel attachment; the through-hole shield tabs go into the PCB if you're board-mounting it, or you can solder a ground wire directly.","metaTitle":"Hirose BNC(75)-PR(6)-PC-12G BNC Jack, 75 Ohm, 12 GHz","metaDescription":"Hirose BNC(75)-PR(6)-PC-12G is a 75 Ohm BNC jack, female socket, rated to 12 GHz. Panel mount with bayonet lock, gold-plated center contact.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors"],"specifications":{"Mfr":"Hirose Electric Co Ltd","Series":"-","Package":"Bulk","Features":"-","Includes":"-","Impedance":"75Ohm","Body Finish":"Nickel","Cable Group":"-","Body Material":"Brass","Housing Color":"Silver","Mating Cycles":"-","Mounting Type":"Panel Mount, Through Hole","Connector Type":"Jack, Female Socket","Fastening Type":"Bayonet Lock","Insertion Loss":"-","Product Status":"Active","Connector Style":"BNC","Frequency - Max":"12 GHz","Number of Ports":"1","lifecycle_stage":"unknown","Mounting Feature":"Flange","Ingress Protection":"-","Shield Termination":"Solder","Base Product Number":"BNC(75)","Contact Termination":"Solder","Dielectric Material":"Polytetrafluoroethylene (PTFE)","Operating Temperature":"-40°C~85°C","Center Contact Plating":"Gold","Center Contact Material":"Phosphor Bronze"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$20.5500","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icsourcedirect.com/5fcaf97601565d30be54430a82c2b22b.pdf","sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/BNC(75)-PR(6)-PC-12G/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy BNC(75)-PR(6)-PC-12G?","answer":"BNC(75)-PR(6)-PC-12G is sourced to order against an RFQ through independent distribution. Submit a request for the quantity you need; availability and current pricing are confirmed at quote time."},{"question":"What is the impedance and connector type of BNC(75)-PR(6)-PC-12G?","answer":"It is a 75 Ohm BNC jack, female socket. The 75 Ohm impedance is the standard for broadcast video and CCTV, not the 50 Ohm used in telecom and test equipment."},{"question":"Is BNC(75)-PR(6)-PC-12G compatible with RG59 cable?","answer":"The connector is a 75 Ohm BNC jack, which is the correct impedance for RG59 cable. However, the termination is solder-only for both center and shield, and the connector body is a panel-mount jack, not a cable plug. You would need to solder the RG59 to the jack's solder cups and mount it to a panel or board. For a field-terminated cable end, you would use a male BNC plug designed for RG59."},{"question":"Does BNC(75)-PR(6)-PC-12G have a bayonet lock and what is the body finish?","answer":"Yes, it has a bayonet lock for quick quarter-turn mating. The body finish is nickel over a brass body."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/hirose-electric-co-ltd/BNC~175~2-PR~16~2-PC-12G","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/hirose-electric-co-ltd/BNC~175~2-PR~16~2-PC-12G when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}