{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GT13SH-1/1PP-DS","brand":"Hirose Electric Co Ltd","brandSlug":"hirose-electric-co-ltd","productSlug":"GT13SH-1-1PP-DS","canonicalUrl":"https://icsourcedirect.com/hirose-electric-co-ltd/GT13SH-1-1PP-DS","factsUrl":"https://icsourcedirect.com/api/mcp/products/GT13SH-1%2F1PP-DS","rawCanonicalId":null},"summary":{"shortDescription":"Hirose GT13 series coaxial receptacle, GT13SH-1/1PP-DS, 2 ports, 50 Ohm impedance, 1 GHz max, right-angle through-hole, solder termination, tin-plated center contacts, gray PBT housing.","salesMarkdown":"The Hirose GT13SH-1/1PP-DS is a 2-port coaxial receptacle in the GT13 series, designed for RF signal paths up to 1 GHz. It presents a 50 Ohm impedance, which sets the characteristic impedance of the transmission line — matching the system impedance is non-negotiable for minimizing return loss and maintaining signal integrity in the coaxial run. The right-angle through-hole mounting lets the connector sit parallel to the board surface, useful for edge-launch or low-profile layouts where a straight vertical connector would eat into enclosure clearance. The gray PBT housing carries board locks and a mounting flange for mechanical retention during soldering and in-service vibration. The 50 Ohm impedance and 1 GHz max frequency together define the usable RF bandwidth. This is not a high-speed connector for multi-GHz links — it is a lower-frequency coaxial interconnect suited for baseband, control, or moderate-rate RF signals. The 30 mating cycles tell you this is a set-and-forget part: the tin-plated center contacts handle the electrical connection, but the low cycle life means repeated mate/unmate will wear the plating. Use it for semi-permanent panel or board connections where the cable is attached once during assembly, not for test points or frequently serviced links. The right-angle orientation and board locks make it a stable PCB anchor — the flange takes the strain off the solder joints when the coaxial cable is routed and dressed. ## Termination and mechanical fit The connector terminates via solder to the PCB — no crimp or press-fit step. The through-hole mounting gives a stronger mechanical anchor than an SMT footprint for a coaxial cable that will be flexed or strain-relieved off-board. The push-pull fastening means the mating plug slides on and off without a threaded coupling nut, which speeds assembly but relies on the housing latch for retention. The PBT dielectric is a standard RF-grade thermoplastic — stable up to the rated temperature, but not a low-loss PTFE material for high-frequency work.","metaTitle":"Hirose GT13SH-1/1PP-DS Coaxial Receptacle, 2-Port, 50 Ohm","metaDescription":"Hirose GT13 series coaxial receptacle, 2 ports, 50 Ohm impedance, 1 GHz max, right-angle through-hole, tin-plated center contacts. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF / Coaxial Connectors"],"specifications":{"Mfr":"Hirose Electric Co Ltd","Series":"GT13","Package":"Bulk","Features":"Board Lock, Mounting Flange","Includes":"-","Impedance":"50 Ohms","Body Finish":"-","Cable Group":"-","Body Material":"Polybutylene Terephthalate (PBT)","Housing Color":"Gray","Mating Cycles":"30","Mounting Type":"Through Hole, Right Angle","Connector Type":"Receptacle, Male Pin","Fastening Type":"Push-Pull","Insertion Loss":"-","Product Status":"Active","Voltage Rating":"250 V","Connector Style":"Coaxial","Frequency - Max":"1 GHz","Number of Ports":"2","lifecycle_stage":"unknown","Mounting Feature":"-","Ingress Protection":"-","Shield Termination":"-","Base Product Number":"GT13","Contact Termination":"Solder","Dielectric Material":"Polybutylene Terephthalate (PBT)","Operating Temperature":"-30°C ~ 105°C","Center Contact Plating":"Tin","Center Contact Material":"Copper Alloy"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.5600","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icsourcedirect.com/api/mcp/products/GT13SH-1%2F1PP-DS/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy GT13SH-1/1PP-DS and what is the price?","answer":"The GT13SH-1/1PP-DS is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for your target quantity."},{"question":"What is the mating cycle life of GT13SH-1/1PP-DS?","answer":"The GT13SH-1/1PP-DS is rated for 30 mating cycles, which means it is intended for semi-permanent or one-time assembly connections rather than frequent disconnect/reconnect use."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icsourcedirect.com/hirose-electric-co-ltd/GT13SH-1-1PP-DS","citationPolicyUrl":"https://icsourcedirect.com/llms.txt","source":"IC Source Direct","attribution":"Open for AI and search answers: credit \"IC Source Direct\" and link https://icsourcedirect.com/hirose-electric-co-ltd/GT13SH-1-1PP-DS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:52:26.615Z","lastPublished":"2026-08-11T15:52:26.615Z","indexable":true}}