Right-Angle Board Mount, 2.50 mm Pitch, 3 Circuits
Molex 0534269030 is a 3-circuit, single-row header from the Mini-Lock 53426 series.
Current, Temperature, and Vibration Duty
The locking ramp fastening type keeps the mated pair engaged under vibration — no secondary lock, but the ramp clicks into the receptacle latch and resists back-out from harness movement. Voltage rating is 250 VAC/DC, matching the insulation system of the Mini-Lock series for indoor equipment and appliance-level isolation.
Glow Wire and Flammability Compliance
Glow wire compliant — the housing material passes the IEC 60335 glow-wire test, a requirement for household appliances, lighting, and heating equipment sold in Europe. UL94 V-0 flammability rating means the nylon housing stops burning within 10 seconds after the flame is removed, with no flaming drips.
Termination and Assembly Fit
Kinked pin, solder termination — the kink locks the pin in the PCB hole during wave soldering, preventing float and ensuring consistent coplanarity. Contact length — mating side 0.157" (4.00 mm), post side 0.134" (3.40 mm). Tin is cost-effective for low-cycle applications; expect a few hundred matings before wear-through.
ROHS3 compliant, no exemptions listed. The nylon housing and tin plating are fully lead-free. Packaged in tray — not tape-and-reel, so factor manual placement or a tube feeder for automated assembly.