Skip to main content
Molex 0534269070 — Pin Headers

Molex 0534269070 Mini-Lock 2.50 mm Right-Angle Header

MPN0534269070
Active

Molex Mini-Lock 53426 header, 0534269070, 7-circuit, 2.50 mm pitch, right-angle through-hole, shrouded 4-wall, locking ramp, tin-plated contacts, glow wire compliant, UL94 V-0.

$1.3300Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesMini-Lock 53426
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

0534269070 key specifications
ParameterValue
SeriesMini-Lock 53426
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250VAC/DC
Current rating3A per Contact
Operating temperature-40°C ~ 105°C
Contact materialPhosphor Bronze
Insulation colorNatural
Insulation height0.264\" (6.70mm)
Insulation materialPolyamide (PA), Nylon, Glass Filled

All specifications

0534269070 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesGlow Wire Compliant
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
Contact shapeCircular
Rows1
Pitch0.098\" (2.50mm)
Positions7
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post39.4µin (1.00µm)
Contact finish thickness - mating39.4µin (1.00µm)

Product details

Why the Right-Angle Shroud Matters for Board-Edge Routing

The 0534269070: In a shallow enclosure — say a thermostat or a compact appliance control — that saves the z-height a vertical header would consume. The 105°C upper operating limit means this header can sit inside a warm appliance cabinet without derating the current, as long as the total load stays under the per-contact ceiling.

Glow Wire Compliance and the Locking Ramp

Glow wire compliant — that is the IEC 60335-1 requirement for household appliances like washing machines, dishwashers, and ovens. Together these two specs mean the connector can go into a product that must pass a glow-wire test at the system level. No secondary lock is built into this header — the ramp alone carries the retention duty.

Frequently asked questions

What connector mates with Molex 0534269070?

This is a male pin header from the Mini-Lock 53426 series. The 2.50 mm pitch and 7-circuit count must match the receptacle's position count.