14-Position Shrouded Header with Locking Ramp
The 0534761410 is a 14-position, single-row header from the Molex Mini-Lock 53476 series, on a 2.50mm pitch.
2.50mm Pitch, Tin Contacts, Glow Wire Rated
At 2.50mm pitch, this header occupies a board footprint that balances routing density with per-contact current capacity — wider than 2.00mm headers common in consumer electronics, narrower than 3.00mm industrial types. Glow wire compliance per IEC 60335-1 is confirmed — this header is suitable for appliances and equipment where a glowing heating element or short-circuit fault must not propagate flame.
Board Guide and Kinked Pin Termination
The header includes a board guide feature that aligns the component during through-hole insertion, reducing placement errors in automated assembly. The kinked pin solder termination provides mechanical retention in the plated through-hole before wave soldering — the kink acts as a standoff, holding the header at a consistent height above the board surface. The post length of 0.134" (3.40mm) fits 1.6mm-thick PCBs with standard through-hole diameters.