6-Position, 0.100" Pitch Breakaway Header — Board Fit and Routing
Mating contacts are tin-plated at 157.5 µinch (4.00 µm) thickness — a robust layer for moderate-cycle applications in controlled environments. Tin is the workhorse plating for cost-sensitive, non-corrosive duty; the thickness here exceeds the typical 100 µinch flash, giving better wear resistance over repeated mates.
Right-Angle Through-Hole Termination — Board-Edge Placement
This is the standard layout for mezzanine or cable-to-board connections where the cable exits the board horizontally. The unshrouded pin field leaves the contacts exposed — a mating shroud or housing is needed to protect the interface from accidental shorting.