What This Header Connects and Why It's Specified
The 0901361108: It's a through-hole solder termination header, so the board-side joint is mechanically robust — the 0.114" (2.90mm) post length gives enough standoff for wave-solder fillet formation.
Pitch, Positions, and Plating — Fit Check
The 8-position count is loaded fully (all positions populated). This ensures full contact wipe within the receptacle before the latch engages. The insulation height of 0.429" (10.90mm) gives clearance for the shroud above the board surface.
The base product number is 90136, which covers the C-Grid III header family.
Housing and Environmental Ratings
The connector is listed for automotive and general-purpose applications, which aligns with its latch-holder retention and shrouded pin protection. Contact material is brass with tin post finish — the tin plating on the solder tail is compatible with standard lead-free wave-solder profiles. No IP rating is listed, so the connector is intended for dry interior environments unless sealed at the system level.