10-Position 1.27mm Pitch Header for Board-to-Cable Wiring
The 0903257010: It carries 10 positions in a single row on 1.27mm pitch, with a shrouded 2-wall housing that protects the male blade contacts during mating. Current rating is 1.2A per contact at 250V, with the 1.27mm pitch setting the per-contact current ceiling — the thin contact beam and narrow pitch limit current more than the plating itself.
Board Lock Anchors Through-Hole Solder Joints
The through-hole termination with 0.130" (3.30mm) post length mates with standard 1.6mm-thick boards, and the push-pull fastening type allows tool-less mating and unmating — no secondary latch or screw required. Mating with the corresponding Picoflex PF-50 receptacle (sold separately) completes the board-to-cable interface; the 1.27mm pitch and 10-position count must match the receptacle's pinout. The housing is keyed by the 2-wall shroud, which prevents reverse insertion or misalignment during blind mating.