Right-angle board mount for tight z-height
The 1723103306: This is a 6-position, single-row header from the Molex Ultra-Fit 172310 series. The right-angle orientation keeps the mated cable assembly parallel to the PCB — useful when the z-height above the board is constrained by an enclosure lid or a card guide. The 3.50mm pitch sets the board footprint and the per-contact current ceiling — the actual current rating depends on the wire gauge used in the mating half, so pair it with the correct Ultra-Fit receptacle and terminal for the load.
Locking latch and shrouded walls for vibration duty
A latch holder on the shroud locks the mated receptacle in place — this prevents the pair from backing apart under vibration or cable tug. The 4-wall shrouding also protects the male pins from being bent during handling or blind mating.
Gold mating interface for repeated connects
The male pins have 3.00µin gold over nickel on the mating face — a flash plating grade suited for occasional mating cycles in a field-service or test-equipment setting. The solder tails are tin-plated at 60.0µin, which wets well during wave or hand soldering. Rated at 600VAC/DC, this header can handle line-voltage power distribution within the current limits of the chosen wire gauge.
Active production and compliance
Availability confirmed at RFQ.