4.20mm pitch, 10-position, locking ramp — board-to-cable fit
The 1724479610: This is a Molex Mini-Fit Jr 172447-series male pin header, 10 circuits in two rows on a 4.20mm pitch. Rated 600VAC/DC, with current depending on the wire gauge you crimp into the mating terminal. Glow wire compliant per the evidence — that means the PA66 housing meets the IEC 60695-2-11 glow wire test at 850°C, a common requirement for household appliances and commercial equipment sold into Europe. The UL94 V-0 rating confirms it self-extinguishes within 10 seconds on a vertical burn test.
Through-hole solder termination, no board lock
Termination is through-hole solder — you wave-solder or hand-solder the 0.140-inch (3.56mm) posts into the PCB. There is no board lock or peg feature on this variant, so the mechanical retention relies entirely on the solder joints and the locking ramp to the mating half. In a high-vibration installation, consider a potting or secondary mechanical clamp if the connector sees repeated cable strain.
Active production, sourced per BOM
The part is ROHS3 compliant. No direct factory stock or lead time is stated here.