30 positions, 1.50 mm pitch – board fit check
The 2016460301: 30 circuits across two rows at 1.50 mm pitch — the footprint matches a 2×15 layout with 1.50 mm centerline spacing. That pitch sets the per-contact current ceiling, and with tin-plated contacts the rating is wire-gauge dependent rather than a fixed number. The header is fully loaded — all 30 positions are populated.
Latch holder and 4-wall shrouding keep the mate secure
The 4-wall shroud surrounds the pins, preventing bent pins during blind mating and protecting against accidental shorting.
Surface mount assembly with pick-and-place features
Solder termination on the surface-mount pads — the header is reflow-soldered to the PCB. Insulation height is 0.354" (9.00 mm) above the board — check the z-height budget against the enclosure lid or adjacent components.
Voltage rating is 100 V.