The Molex CP-6.5 2035551222 is a 2-circuit, 2-row board-to-wire header from the CP-6.5 series. It is a shrouded male pin header with a right-angle through-hole termination, designed for power distribution in harness assemblies where a single pair of contacts carries the main current. The 11.8 A per-circuit rating is sized for a single power pair—this is not a multi-circuit bus connector, but a dedicated power entry point on the PCB.
Key features and deployment context
Tin plating at 50.0 µin on both the mating and post surfaces is a cost-effective choice for moderate mating cycle counts—typically under 50 cycles—in a permanent or semi-permanent installation.
Mating and sourcing
This header mates with the matching CP-6.5 receptacle housing and crimp terminals, which accept the wire gauge specified for the 11.8 A current rating. The 2-position, 2-row configuration means the mating half must also be a 2x1 layout—verify the receptacle order code for the same circuit count and row arrangement before committing the BOM line.