Board-edge fit: right-angle SMT, 1.80mm pitch
The 2080333031: This is a 3-circuit, single-row header from Molex's CONNTAK50 208033 series, designed for board-to-cable/wire interconnects. The 1.80mm pitch sets the PCB footprint and the contact spacing for the mating cable receptacle. Surface-mount, right-angle orientation means the header sits parallel to the board surface, keeping the z-height low for tight enclosures. The shrouded 4-wall housing protects the pins during mating and prevents misalignment. Latch holder fastening locks the mated pair together – important for vibration-prone applications like automotive or industrial panels.
Plating and current: tin contacts for moderate duty
Mating pins are tin-plated with 39.4µin (1.00µm) thickness – suitable for applications with moderate mating cycles (typically 25-50 cycles) in clean, dry environments. Tin is a cost-effective choice for non-corrosive settings. Current rating is listed as varying by wire gauge, so the actual ampacity depends on the cable size in the mating receptacle. The 14VAC/DC voltage rating is typical for low-voltage signal and power distribution.
Sourcing and compliance: active, ROHS3, UL94 V-0
Sourced through independent distribution per RFQ.