Skip to main content
Log in
2080333052 — Molex product photo
Molex

2080333052 Molex CONNTAK50 Header, 1.80mm Pitch, 5 Pos, SMT

MPN2080333052
Active

Molex CONNTAK50 208033 series, 5-position single-row header, 1.80 mm pitch, right-angle surface mount, shrouded 4-wall, tin-plated male pins, 3 A, 14 VAC/DC, UL94 V-0 natural nylon housing.

$2.0800Ref. price · indicative, final on quote
2080333052 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

2080333052 Technical Specifications
ParameterValue
SeriesCONNTAK50 208033
GenderMale Pin
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating14VAC/DC
Current rating3A
Operating temperature-40°C ~ 105°C
Contact materialBrass
Insulation colorNatural
Insulation height0.214\" (5.44mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.071\" (1.80mm)
Positions5
Contact finish - postTin
Contact finish - matingTin
Contact finish thickness - post39.4µin (1.00µm)
Contact finish thickness - mating39.4µin (1.00µm)

Product details

What this header does on your board

The 2080333052: This is a 5-position, single-row header from the Molex CONNTAK50 series, designed for board-to-cable/wire interconnect. The 1.80 mm pitch is tighter than the common 2.54 mm, so the board footprint saves space but also means the mating receptacle must match that pitch exactly.

Solder retention and board mounting

Insulation height is 0.214" (5.44 mm) above the board, which sets the z-height budget for the mated assembly. Confirm this clears any components or enclosure walls on the board.

Supplied in bulk packaging.

Frequently asked questions

What is the mating connector for 2080333052?

This is a board-to-cable/wire header, so it mates with a CONNTAK50 receptacle housing that accepts the matching crimp terminals. The mating half must have a 1.80 mm pitch and 5 circuits. Check the CONNTAK50 series for the receptacle part number.