The 2080353032 is a 3-position, single-row header from the Molex CONNTAK50 208035 series, designed for board-to-cable/wire applications. It uses a 1.80 mm pitch, which sets the PCB footprint and the mating receptacle selection. The header is shrouded on all four walls and secured with a latch holder, providing a positive mechanical lock against vibration. Surface mount termination suits automated pick-and-place assembly; the part is shipped in bulk and includes a pick-and-place feature. The tin-plated male pins are rated for 14 VAC/DC with current capacity varying by wire gauge.
Mating half and termination
This header mates with a CONNTAK50 receptacle housing (sold separately) that accepts the corresponding crimp terminals. The 1.80 mm pitch and single-row layout are the key alignment constraints. The latch holder on the header engages with the receptacle's locking feature to prevent accidental disconnection. Termination is solder — the SMT pads are reflow-soldered to the PCB. The 4-wall shrouding protects the pins during handling and guides the receptacle into correct orientation.