Molex CP-3.3 212210 series header, 2-position, shrouded 4-wall, through-hole, kinked pin solder termination, latch holder, UL94 V-0, -40°C to 105°C
| Parameter | Value |
|---|---|
| Series | CP-3.3 212210 |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 500VAC/DC |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -40°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.549\" (13.94mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Board Guide, Glow Wire Compliant |
| Shrouding | Shrouded - 4 Wall |
| Termination | Kinked Pin, Solder |
| Contact shape | Square |
| Rows | 2 |
| Positions | 2 |
| Row spacing - mating | 0.163\" (4.14mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.132\" (3.35mm) |
| Contact finish - mating | Tin |
| Contact finish thickness - post | 39.4µin (1.00µm) |
| Contact finish thickness - mating | 39.4µin (1.00µm) |
The 2-pin count makes it a natural fit for low-circuit power or signal links where a compact, keyed interface is needed.
The insulation height of 0.549" (13.94mm) gives clearance for the mating housing latch, so check your z-height budget if the board sits close to an enclosure wall.
No gold flash here — this is a cost-optimised signal/power header for production runs where cycle life is not the primary concern.
This is a male pin header — it mates with a CP-3.3 series receptacle housing (sold separately) that accepts the matching crimp terminals. The latch holder on the header locks with the corresponding latch on the receptacle.