Skip to main content
Log in
Molex 212528-0600 — Pin Headers

Molex 212528-0600 Micro-Fit+ 3.00mm Right-Angle Header

MPN212528-0600
Active

Molex Micro-Fit+ 212528 series, 212528-0600, 6-circuit right-angle through-hole header, 3.00mm pitch, shrouded 4-wall, locking ramp, board lock, tin-plated contacts, UL94 V-0.

$1.3100Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesMicro-Fit+ 212528
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

212528-0600 key specifications
ParameterValue
SeriesMicro-Fit+ 212528
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating600VAC/DC
Current ratingVaries by Wire Gauge
Operating temperature-40°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.291\" (7.40mm)
Insulation materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

212528-0600 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBox
FeaturesBoard Lock
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.118\" (3.00mm)
Positions6
Row spacing - mating0.118\" (3.00mm)
Contact finish - postTin
Contact length - post0.125\" (3.18mm)
Contact finish - matingTin

Product details

It connects a board to a cable/wire assembly, mating with the corresponding Micro-Fit+ receptacle housing.

6 positions in a 2-row layout at 3.00 mm pitch, with row spacing also 3.00 mm. Insulation height is 0.291" (7.40 mm) above the board surface — check this against your enclosure z-height budget.

Current, Voltage, and Temperature Range

Rated 600 VAC/DC — suitable for power distribution within an enclosure, not just signal-level circuits.

Mates with Micro-Fit+ receptacle housings (212529 series) using crimp terminals. Termination is solder — the through-hole tails are tin-plated for solderability.

Frequently asked questions

Does the 212528-0600 mate with the Micro-Fit+ 212529 receptacle?

Yes. The 212528-0600 header mates with Micro-Fit+ receptacle housings from the 212529 series.