Right-angle header for wire-to-board power and signal
The 2157601007 is a single-row, 7-position header from the Molex Micro-Fit+ 215760 series, designed for board-to-cable/wire applications. Its 3.00 mm pitch sets the PCB footprint and the mating half requirement — a standard Micro-Fit+ receptacle housing with the same pitch and circuit count. The shrouded 4-wall design protects the male pins from mechanical damage during handling and guides the receptacle into alignment before the locking ramp engages.
Glow wire compliance and board lock for appliance-grade reliability
Glow wire compliant per IEC 60335-1 — the LCP housing material resists ignition under fault conditions, making this header suitable for household appliances and lighting fixtures where glow wire testing is mandatory.
Locking ramp and tin-plated contacts for field-service duty
In applications subject to vibration — such as industrial machinery or automotive interiors — this prevents the connector from backing out. Tin-plated mating contacts are rated for moderate mating cycles (typically 25–50 cycles), suitable for field-service connections where the connector is mated and unmated a few times over the product life. For a given wire size, the derating curve in the product drawing defines the safe continuous current.
ROHS3 compliant. No official successor or cross-reference from Molex — the 215760 series remains the current offering for this pitch and circuit count.