Termination and wire entry
The 387068006: Top termination uses captive screws; bottom termination is PC pin for through-hole soldering to the PCB. With 6 wire entries across 3 circuits (two per circuit), this dual-row layout lets you land two conductors per position — useful for daisy-chaining or commoning without external jumpers. The 12-22 AWG wire range covers most panel signal and control wiring; the 2-wall barrier prevents accidental shorting between adjacent terminals.
The 387068008 is the 4-circuit version of the same Beau 38706 series — same 0.325" (8.26mm) pitch, same 20A at 300V rating, same dual-row 2-wall barrier, same 12-22 AWG wire acceptance. If your BOM calls for 3 positions, the 387068006 is the direct match; the 387068008 will not fit a board laid out for 3 circuits without leaving an unused position.