What it is and where it fits
The Molex 387600111 is the 11-circuit member of the Beau 38760 series dual-wall barrier block family. With a 0.375 inch (9.53 mm) pitch and 15 A per circuit at 300 V, it is sized for industrial control and power-distribution panel wiring where a rugged, open-face screw-terminal strip is the preferred form factor. The dual-wall barrier construction adds mechanical strength to each wire slot, and the flange feature allows direct panel or chassis mounting without a separate DIN-rail adapter. Wire gauge range is 14-22 AWG; the top termination accepts screw-clamp entry, and the bottom is closed, routing the wire entry to the top face only.
Ratings that decide the fit
The 15 A current rating is per circuit at the test temperature implicit in the rating — as with all barrier strips, verify the derating curve against your actual ambient if the panel runs warm. The 300 V rating covers the typical AC mains and control-circuit voltages found in industrial panels; it is not a high-voltage part, so confirm the circuit voltage is within that limit before specifying. The 22 wire-entry positions (11 circuits × 2 entries per circuit) confirm it accepts a wire-in and a wire-back entry at each screw slot, which is the standard topology for daisy-chain or feed-through wiring in a panel. Flammability is UL94 V-0, which satisfies most industrial enclosure requirements for self-extinguishing housing material.
Sourcing and lifecycle
The 387600111 is Active and ROHS3 Compliant — no last-time-buy or NRND flag on record. It is quoted to order against the BOM quantity; confirm the panel layout, flange hole pattern, and wire-gauge fit before committing to the line. Packaging is Tray.