Barrier Strip for Panel Wiring — 6 Circuits, 0.375" Pitch
The Molex Beau 387600306 is a 6-circuit barrier strip from the Beau 38760 series, designed for chassis or panel-mount power distribution and field wiring termination in industrial control cabinets, HVAC equipment, and power distribution panels. It uses a dual-wall barrier design with two rows of wire entries — 12 total — so each circuit accepts a wire from both sides of the block, which is handy for daisy-chaining or bringing a feed in and a load out on the same terminal.
The 15 A figure is per-circuit. The 14-22 AWG wire range covers common control wiring sizes. Dual-wall barrier provides physical isolation between circuits.
This block mounts to a chassis or panel via the integral flange — no DIN rail adapter, so it's a direct screw-down install. The bottom termination is closed, meaning the circuit terminates inside the block rather than passing through the panel; that's typical for internal wiring where you don't need a feed-through connection to the other side of the enclosure. Top termination uses screws with a captive plate — the plate stays captured under the screw head, so you don't have to fish a loose washer out of the panel when you're wiring. The terminal screws are steel with a zinc clear chromate finish, which resists corrosion in humid or washdown-adjacent environments inside a rated enclosure.