Terminal Strip for Panel Wiring
The Molex Eurostyle 39100 391001804 is a 4-circuit enclosed terminal strip on a 0.315" (8.00 mm) pitch, rated 20 A at 600 V. It accepts 12-22 AWG wire through top-entry screw clamps and mounts to a chassis or panel.
Circuit Count and Pitch
With 4 circuits on an 8.00 mm pitch, this strip fits low-circuit-count power distribution or field-wiring junctions. For a higher circuit count, the 8-circuit sibling 391001808 shares the same pitch, current rating, and mounting — it drops into the same panel layout but adds four more positions.
Top termination uses steel screws with a zinc finish — the screw clamps directly onto stripped wire, no ferrule required. The bottom termination is closed, so the strip is intended for through-panel wiring with the screw terminals on the accessible side. Mounting holes in the housing accept standard panel fasteners; the enclosed barrier type prevents accidental shorting between adjacent circuits.
Rated ROHS3 Compliant and built with UL94 V-0 insulation. The product status is Active.