Terminal Strip for Power Distribution — 9 Circuits at 30 A
The Molex Eurostyle 39100 391002009 is a 9-circuit dual-row terminal strip built for panel-mounted power distribution. The 0.394" (10.00 mm) pitch gives you the creepage distance to hold the 600 V rating without forcing a wider board footprint — it's sized for the bus-level current, not a signal line. Rated 30 A per circuit, each screw-clamp position handles the full branch circuit load, with the enclosed barrier preventing accidental shorts between adjacent terminals.
9 vs 8 Circuits — Same Footprint, Different Position Count
The 391002009 shares the same 0.394" (10.00 mm) pitch, 30 A current rating, 600 V rating, enclosed barrier, and white polyamide housing as the 8-circuit 391002008. The difference is one additional circuit per row — 9 circuits here against 8 on the sibling, which changes the overall strip length and the number of wire entries (18 vs 16). If your panel layout was cut for the 8-circuit version, the 9-circuit strip will not fit without drilling an extra mounting hole; the pitch and terminal spacing are identical, so the extra position extends the strip by one pitch width (10.00 mm).
Termination and Mounting — Screw-Clamp, Panel Mount
Top termination uses screws (steel with zinc finish) — the screw-clamp captures 10-18 AWG wire directly. Bottom termination is closed, meaning the strip is intended for through-panel wiring rather than PCB mounting. The chassis/panel mount style uses the two end mounting holes; the enclosed barrier keeps wire strands contained. The dual-row layout gives 18 wire entries total — 9 per row — so each circuit has two independent wire positions.
Compliance and Operating Range
ROHS3 compliant.