Board-Level Power Termination — 2 Positions, 5.00 mm Pitch
The Molex 395430002 is a 2-position Eurostyle ESE 39543 terminal block designed for through-hole horizontal PCB mounting. Rated 10 A per position at 300 V, with a screw-leaf spring and wire guard termination that clamps the conductor evenly — the leaf spring spreads the clamping force across the wire cross-section, and the wire guard prevents individual strands from escaping under the screw head. The 0.34 Nm torque spec is moderate; a standard small screwdriver with a torque-limiting handle is sufficient for production. Tin-plated brass contacts are standard for this class — adequate for the rated current and typical field life, though not intended for high-mating-cycle applications.
Accepts 14-24 AWG solid or stranded wire. The screw-leaf spring mechanism with wire guard is a single-screw termination — strip the wire to the recommended length, insert into the clamp, and tighten the screw to 0.34 Nm. No ferrule is required, though a ferrule on stranded wire can improve bundle retention in high-vibration environments. Mating orientation is horizontal with the board — the wire entry is parallel to the PCB surface, which suits enclosures where the board sits flat and wires route along the panel wall. Single-level construction keeps the profile low.