What It Is
The Molex 464369326 is the 31-circuit right-angle press-fit receptacle in the EXTreme Ten60Power 46436 series — a hybrid power/signal board-to-board connector built around two dedicated high-current paths and thirty signal contacts in a single housing.
Current and Power Layout
Rated 60 A per circuit with a contact layout of 30 signal and 2 power positions — the 60 A headline figure applies to the dedicated power contacts, while the signal circuits carry the lower-current complement within the same housing. The mixed layout lets a single connector handle both power bus and signal routing without splitting the footprint across two parts.
Contact Finish
Gold contact finish at 30.0 µin (0.76 µm) — a thickness suited to multiple mating cycles and providing corrosion resistance on the mating interface. The press-fit tail terminates directly into plated-through holes, eliminating solder and making the connector field-replaceable or reworkable without thermal exposure to the contact interface.
Voltage and Thermal Envelope
Rated 600VAC and 250VDC simultaneously, with an operating range of -40°C to 105°C and a UL94 V-0 flammability rating on the housing material — the envelope covers most industrial AC bus and DC distribution rails within a single connector series. The 105°C upper limit accounts for self-heating under load in enclosed equipment.
Sourcing and Lifecycle
Listed Active with ROHS3 compliance — quoted to order against BOM quantity. No official cross-reference or successor code for this position count. Confirm the 31-position footprint and the 2-power/30-signal split against your board layout before committing.