What it is — the 465629324 in the Ten60Power line
The Molex 465629324 is the 19-position receptacle member of the EXTreme Ten60Power 46562 series, terminated by press-fit through-hole pins rather than solder. It carries a mixed 15-signal and 4-power contact layout — the four power positions handle the heavy current path while the signal positions carry control and sensing. Rated 60A per circuit at the full voltage envelope of 600VAC or 250VDC, gold-over-nickel contact plating at 30µin (0.76µm) covers both the mating interface and the termination zone. The housing is UL94 V-0 black, operates from -40°C up to 105°C, and includes a Mating Guide feature to assist field alignment during blind mating. Bulk packaged with all 19 positions loaded.
What the ratings mean for the fit
The 60A per-circuit rating is the anchor spec — this is a power-class receptacle, not a signal-density play. The 4 dedicated power positions give you a defined high-current bus without mixing bus bars into a signal connector. Press-fit termination means the pins are designed to be driven into plated-through holes on the host PCB under mechanical load, which is the standard termination for high-current board-mount connectors where solder current capacity would be a constraint. The 30µin gold-over-nickel finish is at the heavy end of the plating scale, supporting repeated mating cycles without the surface degradation that thin tin would show at this current level. All 19 positions are loaded, so there is no partial-population option on this exact part number — the circuit count is fixed at 19.