Skip to main content
Log in
Molex 5016452021 — Pin Headers

Molex 5016452021 iGrid 2.00 mm Header, 20-Pin, Shrouded

MPN5016452021
Active

Molex iGrid 501645 series, 5016452021, Board to Cable/Wire header, 2.00 mm pitch, 20 circuits, dual-row, shrouded - 4 wall, latch holder, through-hole solder, tin-plated contacts, UL94 V-0, -40°C to 105°C.

$1.3500Ref. price · indicative, final on quote
Molex 5016452021 datasheet (PDF)
RoHSROHS3 Compliant
SeriesiGrid 501645
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5016452021 key specifications
ParameterValue
SeriesiGrid 501645
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating250VAC/DC
Current ratingVaries by Wire Gauge
Operating temperature-40°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.472\" (12.00mm)
Insulation materialPolyamide (PA), Nylon, Glass Filled

All specifications

5016452021 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBag
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsAutomotive, General Purpose, Industrial, Medical, Telecommunications
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions20
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.126\" (3.20mm)
Contact finish - matingTin
Contact finish thickness - post39.4µin (1.00µm)
Contact finish thickness - mating39.4µin (1.00µm)

Product details

Pitch and footprint — the board-level constraint

At this pitch, the trace escape between pads is tight enough that a 4-layer board is not required, but the routing density is higher than a 0.100-inch header — plan the via fan-out accordingly. 20 positions in a dual-row layout means the connector occupies roughly 20 mm of board edge.

Shrouding and latch — vibration-proof mating

The latch holder locks the pair together — in an automotive or industrial cabinet subject to vibration, this prevents the connector from walking loose. The board guide feature further aids alignment during assembly, reducing the risk of stubbing pins when the harness is mated blind.

Voltage and temperature — insulation class

Rated 250 VAC/DC, the header suits signal and low-power distribution within equipment enclosures.

Frequently asked questions

What is the pitch of Molex 5016452021?

2.00 mm (0.079 inches) on both the mating pitch and the row spacing.

What is the mating part for 5016452021?

The mating half is a Molex iGrid 501645 series receptacle housing (e.g., 501645-xxxx) with crimp terminals. The latch holder on the header engages the corresponding latch on the receptacle.

Is 5016452021 RoHS compliant?

Yes, ROHS3 compliant.

What is the current rating of 5016452021?

Varies by wire gauge — the header itself does not have a fixed per-contact current rating; it depends on the terminal and wire size used in the mating receptacle. Consult the iGrid 501645 terminal datasheet for the derated current at your wire gauge.