Right-angle header for perpendicular cable exit
The 5018761440 is a 14-position, 2.00mm pitch header from the iGrid 501876 series, designed for board-to-cable/wire connections.
Tin-plated contacts for moderate-duty signal/power
Tin-plated contacts suit moderate-duty signal and power applications in clean, indoor environments. The 2.00mm pitch and 2-row layout with 0.079" (2.00mm) row spacing gives a compact footprint that still leaves room for trace routing between pads on a standard PCB. The 0.126" (3.20mm) solder tail length suits boards up to ~1.6mm thick; confirm your board thickness against the tail protrusion for a clean solder fillet.
Active production — no obsolescence worry
This header mates with a matching iGrid receptacle housing (e.g., 501877 series) and crimp terminals. The 14-position, 2-row layout with latch holder requires the receptacle to have the same circuit count and a compatible latch feature. Confirm the mating part number against the BOM before committing — the latch holder on this header expects the receptacle's locking ramp to engage cleanly.