Micro-Lock PLUS 3-Position Receptacle Housing
The single-row layout at 1.25mm pitch keeps the assembly narrow — useful for tight harness routing in automotive interiors, industrial sensors, or consumer appliances.
Three positions mean this housing matches a 3-circuit BOM line exactly — no spare cavities, no jumper tricks. The 1.25mm pitch is tight enough that the crimp terminals sit close together; make sure your wire stripping and crimp tooling can handle the narrow centerline without nicking adjacent seals or insulation. Crimp termination (female socket contacts, ordered separately) means you build the wire assembly at the bench, not on the board. The latch holder locks the housing to its mating header — field-service techs will hear the click and know the connection is seated. No secondary TPA retainer is listed for this housing, so terminal push-back is a risk if the crimp height is off; use the manufacturer's specified crimp tool and pull-force gauge.
This receptacle mates with the Micro-Lock PLUS 505565 series single-row headers (male pin headers, through-hole or SMT).