Molex 88741-8800 DVI digital to DFP passive adapter, ROHS3 compliant, Box packaging.
| Parameter | Value |
|---|---|
| Series | * |
| Package | Box |
DFP (Digital Flat Panel) is an older 20-pin digital video interface standard that predates DVI. The 88741-8800 adapter maps the DVI-D single-link signal set — TMDS data lanes, clock, DDC channel, and +5 V power — to the DFP connector pin-for-pin. It is a passive adapter, so the DVI source must be DVI-D (digital-only), not DVI-I (analog+digital). The adapter does not convert analog VGA or DVI-A signals.
Yes, the Molex 88741-8800 is a passive adapter that connects a standard DVI-Digital (DVI-D) output to a DFP connector. It works with DVI-D single-link sources only — not DVI-I (analog+digital) or DVI-A (analog-only).
The 88741-8800 is a passive adapter that maps DVI-D single-link signals — TMDS data lanes, clock, DDC channel, and +5 V power — directly to the corresponding DFP connector pins. It is a straight-through mapping, not an active conversion.
DFP (Digital Flat Panel) is a 20-pin digital video interface standard introduced in the late 1990s for connecting flat-panel monitors. It carries TMDS digital video signals and DDC communication, similar to DVI-D but with a different physical connector.
DFP and DVI-D use the same digital video signaling (TMDS) but have different physical connectors. The 88741-8800 adapter bridges the two by mapping the DVI-D signals to the DFP connector pin-for-pin, enabling compatibility between DVI-D sources and DFP displays.