Skip to main content
Log in
90122-0768 — Molex product photo
Molex

Molex 90122-0768 C-Grid III Header – 16 Pos, 2.54mm Pitch

MPN90122-0768
Active

Molex C-Grid III 90122 series, 16-position unshrouded breakaway header, 2.54mm pitch, right-angle through-hole, gold-plated mating contacts, tin-plated solder tails, UL94 V-0 black polyester housing.

$3.0500Ref. price · indicative, final on quote
90122-0768 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

90122-0768 Technical Specifications
ParameterValue
SeriesC-Grid III 90122
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Contact materialBrass
Insulation colorBlack
Insulation height0.242\" (6.14mm)
Insulation materialPolyester, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
ApplicationsAutomotive, General Purpose
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions16
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.114\" (2.90mm)
Contact finish - matingGold
Contact length - mating0.266\" (6.75mm)
Contact finish thickness - post118.1µin (3.00µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Contact Interface – Gold Mating, Tin Tails

The 90122-0768: The tin-plated solder tails (118.1µin) are standard for wave-solder assembly. The brass contact material provides adequate conductivity for signal-level currents.

Application and Environment – Automotive and General Purpose

Rated for automotive use, the header carries UL94 V-0 flame-rated polyester insulation and can withstand the vibration and temperature cycling typical of under-hood or interior vehicle modules. The unshrouded design allows direct access to pins for probing or manual wiring.

Frequently asked questions

What is the pitch of Molex 90122-0768?

The mating pitch is 0.100" (2.54mm), with the same 0.100" row spacing between the two rows.

What connector mates with 90122-0768?

Confirm the circuit count and keying match your application.

Is 90122-0768 RoHS compliant?

Yes, it is ROHS3 compliant.