Skip to main content
Molex 919991284

Molex Appli-Mate 919991284, 4-Pos 5.00mm Header, 16 A, Tin

MPN919991284
Active

Molex Appli-Mate 91999 919991284, Header Male Blades, 4 Positions, 5.00mm Pitch, Through Hole, Solder, Tin Contacts, 16 A, 250 V, Natural PA66, Latch Lock, Board Guide, Bulk.

$1.67Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesAppli-Mate 91999
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

919991284 specifications
ParameterValue
SeriesAppli-Mate 91999
MountingThrough Hole
Connector typeHeader, Male Blades
Fastening typeLatch Lock
Voltage rating250 V
Current rating16 A
Operating temperature-20°C ~ 120°C
ColorNatural
Contact materialBrass
Material - insulationPolyamide (PA66), Nylon 6/6
Pitch0.197\" (5.00mm)
PackageBulk
FeaturesBoard Guide
TerminationSolder
Contact finishTin
Rows1
Positions4
Contact finish thickness118.1µin (3.00µm)

Product details

Product Introduction

The Molex 919991284 is a 4-position header from the Appli-Mate 91999 series, designed as a wire-to-board power interconnect.

The 16 A per circuit rating means each blade is sized for bus-level current — this is a power header, not a signal line.

The 919991284 shares the same 5.00 mm pitch, 16 A rating, and latch-lock fastening as the 2-position 919990499. The difference is position count — 4 circuits here against 2 on the sibling — and contact finish: this one uses tin (118.1 µin), while the 919990499 carries silver (78.7 µin). For a 4-circuit power BOM line, the 919991284 matches the position count directly; the tin plating is adequate for standard indoor duty, but if the assembly sees higher mating-cycle counts, the silver-plated sibling offers better fretting resistance.

Frequently asked questions

What is the pitch on the 919991284?

The pitch is 0.197" (5.00 mm), which drives the board footprint and creepage for the 250 V rating.