What the B08P-VL is
The Molex B08P-VL is an 8-circuit dual-row board-to-wire header in the VL series, rated 20 A per contact at 600 V with tin-plated copper alloy contacts throughout (both mating and solder-tail sides). The 4-wall shroud and square-pin contact geometry are consistent across the VL family; the 8-position count is the variable that selects this member against its siblings in the series.
What the ratings mean
At 20 A per circuit this header carries genuine power-interconnect duty — the tin plating (both sides,) is rated for the current but limits reconnection cycling compared to gold. If the application needs repeated mate/unmate cycles, the tin finish is the governing constraint, not the ampacity. The 600 V rating sits comfortably above most industrial AC/DC distribution rails at this contact density, so voltage is not the selection limiter here. The 0.244 inch (6.20 mm) pitch and 0.326 inch (8.28 mm) row spacing define the board footprint and routing channel between rows. The 29.2 mm mated stack height is fixed for the series regardless of position count — board planners working to a z-height budget can treat this as a constant across the VL family. The 4-wall shroud and latch-holder fastening type provide mechanical alignment and retention in panel or equipment-side board-to-wire applications. The 0.142 inch (3.60 mm) post length is sized for standard through-hole solder engagement — confirm your PCB hole size and solder-side clearance before committing.
Where this class is used
Board-to-wire VL-series headers are common in industrial equipment distribution — the 600 V rating and 20 A per circuit make them suited for internal power bus connections, control cabinet sub-assemblies, and motor-drive harness midpoints where a board-rooted connection needs to transition to a wire harness. The 8-position dual-row covers a moderate circuit-count node without the density penalty of a single-row small-pitch part.
Sourcing and compliance
The B08P-VL is Active and ROHS3 Compliant per the listing. No official successor or cross-reference appears in the listing for this member of the VL series — sourcing is against an RFQ for BOM quantity.