Wire-to-board receptacle for tight-pitch harness routing
The 2132271410: This is a Molex CLIK-Mate 213227 series receptacle, 14 positions in two rows on 1.50 mm pitch. The post-side is tin — that's the solder-joint side, where the alloy wets during reflow.
SMT footprint and board-retention features
The insulation height is 8.80 mm above the board — that's the z-height budget you need for enclosure clearance above the connector body. The pick-and-place feature and solder-retention pads let the part survive reflow without tombstoning; the forked contact design gives a compliant beam that wipes the mating pin on insertion.
Current rating depends on wire — check the application
For the exact derating curve, the product drawing in the datasheet shows the current vs. ambient temperature profile.