Board-to-Cable Receptacle for 1.50mm Pitch Harnesses
The 2132272470 is a Molex CLIK-Mate 213227 series receptacle, designed for board-to-cable/wire applications. The solder tails are tin-finished for reliable wetting during reflow.
The insulation height of 8.80mm gives clearance for cable strain relief above the board. The natural colour makes visual inspection of the latch engagement straightforward on the line.
Temperature Range and Current Handling
The current rating is wire-gauge dependent — the limiting factor is the crimp terminal and wire size, not the receptacle contact itself. Voltage rating is 100VAC/DC, typical for signal-level and low-power distribution within a control cabinet.